Top 10 Best Pole Saws for 2019

best pole saw

If you want to keep the trees around your home or other property looking their best, there is a need to do occasional pruning to remove dense limbs and get rid of broken branches. There are a few ways to tackle this issue but one of the most time efficient and simplest is to use a pole saw – which is essentially a chainsaw on a long pole that allows you to cut branches while remaining on the ground.

Pole saws are the ideal option for pruning trees and can do some work with removing foliage, twigs, and large vines. A manual pole pruner or shears can also handle the additional jobs. If you are looking to cut through branches of two inches or more in diameter, the best pole saw will make it a thousand times easier.

If a pole chainsaw is something you want to invest in to make life a little easier, we are here to offer some assistance. We’ve rounded up the top 10 pole saws for 2019 and will share some information about each so you can determine which fits your needs the best. Read on for our pole saw reviews and we will also share what you need to know when choosing the one for you.

The Best Pole Saw: Reviews and Comparisons

 NameExtension LengthWeight
Sun Joe SWJ803E 10-Inch 8-Amp Electric Multi-Angle Pole Chain Saw8.8 Feet7.9 Pounds
Greenworks 8.5 Foot 40V Cordless Pole Saw8 Feet9.2 Pounds
Remington RM1025SPS Ranger 8-Amp Electric 2-in-1 Pole Saw & Chainsaw10 Feet13.3 Pounds
Black+Decker LPP120 20-Volt Lithium-Ion Cordless Pole Saw10 Feet10.3 Pounds
Worx WG309 8-Amp 10-Inch 2-in-1 Electric Pole Saw & Chainsaw8 Feet10 Pounds
Sun Joe SWJ800E 8-Inch 6.5-Amp Telescoping Electric Pole Chain Saw8.7 Pounds7 Pounds
Milliard 6-16 Foot Extendable Tree Pruner / Pole Saw with 3-Sided Blade16 Feet5.5 Pounds
Silky New Professional Series 179-39 Telescopic Landscaping Pole Saw Hayauchi 39021 Feet5.7 Pounds
Remington RM1035P Ranger II 8-Amp Electric 2-in-1 Pole Saw & Chainsaw10 Feet12.5 Pounds
Ego Power+ PSA1000 10-Inch Pole Saw Attachment for Ego 56-Volt Lithium-Ion Power Head SystemN/A4.2 Pounds

Sun Joe SWJ803E 10-Inch 8-Amp Electric Multi-Angle Pole Chain Saw

The Sun Joe SWJ803E is a great option for helping prune and trim trees without dealing with the dangers of going up on a ladder. It offers a telescoping pole that can go from 5.8 to 8.8 feet for a large amount of overhead reach. This telescoping pole saw is capable of handling tree limbs of up to nearly 10 inches in diameter.

Getting started with this pole saw is simple. All you have to do is engage the safety lock button and then press on the trigger switch. Once you release the trigger, the saw easily switches back off. This pole saw has an adjustable head angle so you can easily maneuver between limbs and put pressure on branches when cutting up high.

Pros:

  • Improved cutting through a multi-angle head
  • Easy to start and get to work
  • Powerful motor for extreme cutting ability

Cons:

  • Can be fairly heavy when fully extended

Greenworks 8.5 Foot 40V Cordless Pole Saw

The Greenworks 40V Pole Saw is one of the top battery powered pole saws on the market. It is quite lightweight to prevent fatigue and allow you to easily get to higher branches while working. The lithium-ion battery pack provides a reasonable amount of power and can cut through moderately thick branches with ease.

This is also a well-priced model that won’t break the bank if you choose it. However, there are a few things to be aware of when choosing this model. It has a reach of only eight feet, which might be a bit short for people with taller trees to deal with. It also can sometimes run out of battery power quicker than you would expect, typically when working on thick branches. However, all in all, it is one of the best cordless models you will find.

Pros:

  • Lightweight and easily portable
  • Reasonable price for those on a budget
  • Features a powerful motor for a cordless model

Cons:

  • Battery may sometimes die earlier than expected

Remington RM1025SPS Ranger 8-Amp Electric 2-in-1 Pole Saw & Chainsaw

The first thing to know about the Remington RM1025SPS is that it is a two-in-one tool which means the chainsaw can be removed from the pole. It has a large eight amp motor which can easily saw through logs and branches. The chain and blade are 10 inches which also allows use with larger pieces of wood.

The safety locks on this model are slip locks which prevent the blade from coming loose or causing harm. The pole can extend all the way to 10 feet but can also be made shorter when needed. It is created from a high quality aluminum so you know you are going to get durability that will last through the years. This saw is a bit heavier than some but clocks in at under 13 pounds which is still reasonable.

Pros:

  • Offers a two-in-one pole saw combination
  • Comes with durable 10 inch bar and chain
  • Durable and long aluminum pole

Cons:

  • Some users have experienced trigger jams

Black+Decker LPP120 20-Volt Lithium-Ion Cordless Pole Saw

This Black+Decker LPP120 is a battery powered pole saw that comes in at an affordable price. It has a reach of around 12 to 13 feet which is sufficient for nearly anyone doing home jobs. Another perk is that it uses the same battery at other products in the line so you can swap between tools with relative ease. This is a huge perk if you need multiple batteries at the ready.

This pole saw is only a bit over six pounds which is light enough for any job and won’t be a problem to lift, even if you need to do so for an extended period of time. However, the battery life isn’t the best at around 20 minutes. If you have extra batteries or small jobs to do, it remains a good and inexpensive option to consider.

Pros:

  • Lightweight and easy to use pole saw
  • Compatible with a wide range of gardening tools
  • Extends up to 10 feet in height

Cons:

  • Fairly short battery life can be disappointing

Worx WG309 8-Amp 10-Inch 2-in-1 Electric Pole Saw & Chainsaw

When what you want is a versatile and affordable pole saw, the Worx WG309 is a great tool to have available. It has an eight amp motor for consistent power along with an eight foot telescopic pole to get the job done. It also includes a rotatable handle, so you have additional control when trimming dense trees or pruning around hard to reach foliage.

This pole saw and chainsaw comes with a 10 inch bar which can easily hack right through limbs and branches of up to around eight inches in only a few seconds. It can also be disassembled so you can use the chainsaw on its own. Extra features include an oil indicator, auto-tensioning chain system, and automatic chain oil.

Pros:

  • Ideal for small and medium pruning and cutting jobs
  • Features automatic chain oil for less maintenance
  • Compact and easy to use

Cons:

  • Fully extended pole can be a bit heavy

Sun Joe SWJ800E 8-Inch 6.5-Amp Telescoping Electric Pole Chain Saw

This pole saw by Sun Joe starts off with an Oregon blade and chain, which is one of the best brands out there for these components. It also offers an automatic oiling system so you know the blade will run smooth even during long projects. The pole uses a twist telescoping handle and includes a non-slip grip on the handles for additional comfort.

This might not be the most powerful pole saw on the market but it’s lightweight and completely reasonable for small and medium sized jobs. It’s quick and the pole can reach way up into the trees without any problem. It has plenty of excellent features to make it well worth being considered as the best pole saw for the year.

Pros:

  • Weighs in at only seven pounds
  • Automatic oiler to keep your chain lubricated at all times
  • Features high-quality cutting bar

Cons:

  • Some users feel telescoping section is flimsy

Milliard 6-16 Foot Extendable Tree Pruner / Pole Saw with 3-Sided Blade

This extendable pole saw from Milliard can go from six feet to 16 feet, which is far and above most of the other saws you’ll see on the market. This might seem a bit too long, but it is fully capable of taking care of the tree branches at your home. The system comes with both sharp shears and a saw that can snip and cut through limbs with ease.

There is an adjustable handle on the poll along with a fiberglass construction that allows for top maneuverability while retaining a large amount of strength. The top sections are made of aluminum which helps create a lightweight pole saw. The handle also offers a foam grip for extra comfort when doing a lot of work.

Pros:

  • Made of lightweight fiberglass and aluminum
  • Steel blade is strong and will stay sharp
  • Foam grip handle is adjustable for comfort

Cons:

  • Aluminum may bend easier than expected

Silky New Professional Series 179-39 Telescopic Landscaping Pole Saw Hayauchi 390

The Silky Hayauchi is a unique pole saw that can extend from eight feet all the way to a massive 21 feet. Depending on height, you can expect a reach of around 23 to 24 feet. The pole has four sections and three extension points which makes it long but can also mean you have to concentrate to maneuver it well.

The pole itself is made of rubber and aluminum with the saw handle covered in rubber for comfort. This is important if you plan to use the pole saw at its maximum reach. This tool can be used for pruning, trimming, forestry, and gardening. The blade is high quality, but the pole may bend more than expected and some users have experienced breaks. If you want the longest pole saw out there, this is going to be the one that offers exactly what you desire.

Pros:

  • One of the longest pole saws available on the market
  • Two sickle design with a comfortable rubber handle
  • Blade rows are fully adjustable

Cons:

  • One of the most expensive pole saws available

Remington RM1035P Ranger II 8-Amp Electric 2-in-1 Pole Saw & Chainsaw

This is another combination pole saw and chainsaw where you can take off the chainsaw and use it chop branches into smaller lengths. This is an electric model that is easily convertible. It has a 10 inch bar for cutting around medium or small branches and an eight amp motor which delivers the power you need when you need it.

This product offers plenty of power and the perk of the use of a chainsaw for those who don’t want to buy both items separately. The electric motor allows you to get through your work without the stress of changing batteries of the fatigue associated with a gas powered model. However, you need to have close access to a power source or you aren’t going to get much done.

Pros:

  • Can cut branches up to 15 feet overhead
  • Chainsaw easily detached without the need for tools
  • Robust eight amp electric motor included

Cons:

  • Not as portable as non-electrical pole saws

Ego Power+ PSA1000 10-Inch Pole Saw Attachment for Ego 56-Volt Lithium-Ion Power Head System

This pole saw is a bit different from the others on this list because it’s a head system that connects to the Ego Power+ PH1400. It works by battery so it’s very lightweight and it can be used anywhere, which isn’t the case with gas powered and electric models. There’s no need to worry about a long start time or the fumes from gasoline.

The cutting framework uses Oregon, which we’ve mentioned is one of the top brands available. There are also two gatekeeper bars and a Narrow-Kerf sprocket. Those who already have an Ego Power will find this attachment adds additional value to that purchase.

Pros:

  • Features a cutting diameter of six inches and an eight inch cutting bar
  • Compatible with the Ego Power
  • Offers a two year limited warranty

Cons:

  • Battery may not be very reliable

Who Should Consider Purchasing a Pole Saw

Anyone who has property with large shrubs or trees will find a pole saw is useful for removing branches without the need to climb onto a ladder. In addition to giving you extra height vertically, a work pole saw can be used to reach over things like fences and hedges to make yard work a cinch.

Most of the pole saws on the market are going to be either manual, gas powered, or electric. You will need to think about your specific requirements when choosing the right pole saw for your needs. While a manual saw can handle light pruning, one that has a source of power is going to make pruning thick branches much simpler.

Some of the electric, gas, and battery operated pole saws you will see offer detachable chainsaws so you can also break down tree branches into small pieces. This can be the ultimate option for a gardener or other individual who has a need for both types of tools.

Choosing Between Types of Pole Saws 

As we mentioned, there are manual pole saws as well as those that are corded and use electricity, those that are powered by gasoline, and pole saws that use a battery for power. If you aren’t sure which of these types is right for you, we have some additional information that may help you make a decision.

Electric Pole Saws

There are a number of advantages to choosing one of the best electric pole saws on the market for 2019. These are clean tools that create no emissions when being used. There’s no need to deal with working with messy gas and oil, which is common with most power tools like these.

Instead, an electric pole saw will plug into an outlet like any other electronic device. You plug it in and you can immediately begin pruning and trimming your yard until it looks the way you want. The only real disadvantage to this choice is that you need to stay near a power outlet all time or have access to a high quality extension cord.

Gas Powered Pole Saws

If you want something that is a bit more portable and that has the ability to be used anywhere, a gas powered pole saw might be the right choice. These saws are great for working in tight quarters and there is no cord to worry about while you work.

However, these tools do require gasoline, so you have to keep up with the fuel level. Oil is also needed, and the motors tend to be heavier than the other pole saws on the market. However, those who need to do serious jobs will find a gas powered pole saw can stand up to nearly anything.

Battery Powered Pole Saws

As with a gas powered saw, the ones that are powered by battery are very portable. This makes them an excellent option for large properties, camping expeditions, and large acreages with trees. These tools come with a strong motor and powerful battery capable of cutting through small logs, thick brush, and tough tree limbs.

With a battery powered model, you will need to be sure the battery is charged before use. Most come with a charger but if you have a lot of work at hand, you may need an extra battery. Lithium ion batteries tend to last longer so those models are recommended if you choose battery powered saws.

Features to Consider When Choosing the Best Pole Saw

As with any other power tool out there, some are better for certain jobs than others. There are pole saws that are geared toward professionals, do-it-yourselfers, and beginners. Looking at the available features will give you a good idea of whether a specific pole saw is right for your needs.

Working Height 

The working height of a battery powered pole saw can be confusing if you aren’t aware of its definition. This is not the length of the pole but the length of your arm plus the pole. In most cases, the arm length is estimated at two to three feet. As such, a pole saw with a working height of 10 feet would actually be seven or eight feet long.

Most of the saws you see will stop at about 12 foot since it can be difficult to control a saw that is much longer than that. This becomes even more relevant if there is a lot of wind in the area. Some models will be telescoping so you can adjust the height as you need.

Cutting Bar Length

When you see the cutting bar length, that refers to the maximum diameter of the branches that can be cut. These lengths can range from six to 12 inches although may max out at eight inches or so. The idea behind this is that you should choose a length that is at least two inches more than the diameter of branches you are expecting to cut. So if a branch is eight inches in diameter, a cutting bar length of 10 inches is the minimum you want to go with.

Pole Saw Weight

It’s also important to consider the weight of the best electric pole saw that you might be planning to purchase. These pole saws can get pretty hefty at 20 pounds or so but even one that is between 10 to 15 can cause some fatigue when using it for long periods of time. In many cases, cordless and electric saws are going to weigh less than the models powered by gas.

Removable Cutting Head

You will notice that some pole saws come with a removable cutting head. This can be removed form the end of the pole and used as a traditional chainsaw. You will want to consider whether this is something you need. It can come in handy if you cut a branch and want to break it up into smaller pieces for use in your fireplace.

Other Features to Watch For

The companies that manufacture pole saws are constantly looking for ways to create devices that are easier to operate and which last for a longer period of time. That means you may see other features that make operation of the saw easier. Some have non-slip grips, others have anti-vibration features, and some have chains that oil themselves. Each of these can lead to more efficient use and less time spent on maintenance.

Choosing the Best of Top Rated Pole Saws

Because there are so many features on pole saws and everyone has their own needs, picking a single option that is the best of the best is difficult. Instead, consider the top 10 options above the best out there and use your own preferences and requirements to narrow them down.

No matter which you choose, these pole saws can all be counted on and will offer you an easier time doing tree work. Tree trimming doesn’t have to be a hassle and with the right tool, it can even be fun and far from time consuming. Think about what you want from your tool and go from there. You may be surprised how easy it is to find an option that matches your needs.

11 Best Professional Chainsaws for 2019

best professional chainsaw

Whether professional forester or tree expert, or even a homeowner interested in only the finest tools, it is a good idea to invest in the best professional chainsaw possible. This is a saw that can work every day, without fail and all while handling some of the toughest work imaginable. It will have to manage timber of any kind as well as lots of weather conditions.

Naturally, the perfect chainsaw doesn’t mean just one thing, but is the combination of different features, capabilities, specifications and features. It is also about you and your needs, such as a saw that is sized and weighted for your needs.

The goal of this review list of the is to first introduce readers to the best rated and most popular models on the market. However, we will also review what you need to know and consider when making your choice.

In the list below, you will see many familiar and well-known brands, as well as a few lesser known companies. All of the chainsaws, however, will be made to endure the demands of professional level usage, cutting any sort of timber, and meeting many different demands. Let’s look at the top chainsaws and then those basic tips for chainsaw purchasing.

Best Professional Chainsaw for 2019

 NameWeightBar Length 
Husqvarna 460 Rancher21 lbs.24”Check on Amazon!
DEWALT DCCS620B 20V MAX XR8.8 lbs.12”Check on Amazon!
Milwaukee Electric Tools 2727-21HD Chainsaw21 lbs.16”Check on Amazon!
Remington RM4620 Outlaw16.6 lbs.20”Check on Amazon!
DEWALT DCCS670X1 FLEXVOLT 60V MAX12.2 lbs.16”Check on Amazon!
Greenworks 40V Cordless Chainsaw, 202626 lbs.12”Check on Amazon!
BLACK+DECKER LCS124010.4 lbs.12”Check on Amazon!
EGO Power Volt Lithium-Ion Cordless Chain Saw8.3 lbs.14”Check on Amazon!
Worx WG3226.19 lbs.10”Check on Amazon!
WEN 40417 40V Max12 lbs.16”Check on Amazon!
Blue Max 2016020.9 lbs.22”Check on Amazon!

Husqvarna 460 Rancher

This is one of the biggest on the list and is the top chainsaw when thick cuts are the order of the day. With a much longer bar and a powerful 60cc gas engine (two-cycle), it is a heavy worker. Designed for performance in most conditions, it is equipped with an adjustable oil pump that allows easy changes to oil flow depending on weather or current use.

It comes with the brands “X Torq Tech” that pushes a lot of torque even over a wide range of speeds and challenges and all while using less fuel and lower emissions. It also has the brand’s LowVib tech to reduce vibration, ensuring hours of comfortable use with no nasty after effects.

The design of the chainsaw emphasizes ergonomic principles, ensuring that the 21-pound weight is not going to become overly tiring. There is also Smart Start tech and a side-mounted chain tensioner for tool free adjustments.

Maintenance is simplified in many ways on this one with a centrifugal air cleaning system that eliminates debris and dust before it hits the air filter, prolonging the engine and reducing maintenance. And when it is time to clean or replace it, the air filter has a quick-release system.

Pros

  • Powerful engine and long blade can cut almost anything
  • Easy to start
  • Quick and easy maintenance
  • Little to no vibration

Cons

  • Some reports of trigger issues
  • Reports of lag with on/off switch

DEWALT DCCS620B 20V MAX XR

This compact and cordless saw is noted for ease of use, maneuverability, and low kick back 12” Oregon brand bar and chain. Ideal for those working in construction and forestry, it is a highly efficient option.

The brushless motor delivers longer run times and offers a speed of 25.2 feet per second. Paired with the easy to adjust chain tensioning and bar tightening knobs, it enables optimal clamping force for each job. At less than ten pounds, it is unlikely to cause any sort of fatigue, and the remarkably ergonomic design of the handles ensure that it ranks as one of the easiest and best professional chainsaws to put to work.

Not made for the heaviest work, it is nonetheless the ideal and most portable option for carpenters and builders as well as a lightweight tool for quick jobs in the woods.

Pros

  • Safe and easy to use
  • Powerful and yet designed for low risk of kick back
  • 12” bar can tackle lots of jobs

Cons

  • Some complaints of difficulty in chain adjustment
  • Oil filter cap can be difficult to remove

Milwaukee Electric Tools 2727-21HD Chainsaw

A corded, electric chainsaw, it is packed with features that ensure it can deliver a high performing range of cuts under many conditions. In fact, this model features the brand’s patented powerstate Brushless motor that is able to deliver at the same level as a 40cc gas engine. The M18 fuel system is the brand’s high output battery system with 50% more power than others.

The 16” bar is supported by more of the brand’s tech. The redlink plus intelligence offers overload protection that keeps both the battery and the chainsaw protected during the heaviest work. The chainsaw has a variable speed trigger to ensure optimal control, as well and will provide up to 150 cuts per full battery charge.

Safe and ergonomic, it has been designed to meet the needs of professionals in maintenance, landscaping and power utilities, but is not ideal for foresters.

Pros

  • Lots of tech that ensures it runs long and safely
  • Lightweight and yet powerful
  • Delivers power similar to 40cc gas engine
  • Runs for hours on single charge

Cons

Remington RM4620 Outlaw

A gas-powered machine, it offers an impressive 46cc (two-cycle) that is up to some of the most challenging work. With a 20” bar, it can make its way through almost any sort of wood, and paired with the durable, die-cast housing, it is a real workhorse.

This model features a lot of the niceties that ensure safer and easier use. It offers an easy to use side-access tensioning system that lets users safely and quickly adjust tension without the use of tools. There is a unique, five-point anti-vibration system that reduces fatigue and the ergonomic and padded handle system that ensures long-lasting comfort and control. This is significant, because at 16 pounds the chainsaw could become cumbersome.

It has also been designed with easy to use start technology that ensures the pull start is as responsive as it should be. The machine also has an automatic oiler for the most consistent performance, and it also includes a carrying case and longer-than-average warranty that runs for two years.

Pros

  • Effective anti-vibration tech targets five different points or zones
  • Longer bar with powerful motor makes short work of even thicker trees
  • Easy to adjust without tools

Cons

  • A bit heavier than many
  • Complaints about a sticky on/off switch

DEWALT DCCS670X1 FLEXVOLT 60V MAX

In any list, there is apt to be at least one that is a good “all around” saw capable of being used by novices through to experts. Many say that this is a practical and high-performing model that will get the work done, regardless of the challenges. Yet, it is versatile enough for homeowners, too.

What surprises many is that it is a cordless, lithium-ion saw. With a brushless motor and 60v battery, however, it really delivers. A 16” Oregon bar and chain, it promises no or low kickback.

It has all kinds of safety features, including a chain brake, guards on the front handles, and low noise output. It starts and stops via the trigger, as well. This means no risks of injury or difficulty because it is the matter of pulling the trigger to fire up the saw. Tool free tensioning adjustments are possible thanks to the knob along the side, and the auto-oiling is yet another addition to this chainsaw’s array of appealing features.

This chainsaw features patented DeWalt FlexVolt technology that keeps the saw’s battery at the best level and ensures no interruptions, too.

At just over 12 pounds it is not likely to lead to fatigue and yet it has a balanced and ergonomic design that makes it a delight to use. A three year limited warranty is a nice extra.

Pros

  • Powerful brushless motor
  • The 16” Oregon bar with its low kick back design is a nice feature
  • Easy adjustments via the tension knob and quarter-turn oil cap

Cons

  • Some complaints about oil system
  • Battery power means that loss of power is always an issue

Greenworks 40V Cordless Chainsaw, 20262

This battery-powered chainsaw comes from a lesser-known brand, but rates among the best because of its long list of premium features. Part of the brand’s full line of interchangeable 40v battery operated equipment, it can work well for homeowners, contractors, power supply professionals and more.

The 12” bar and incredibly light six pound weight make this chainsaw a delight to use. With its instant electric start that requires a simple, two-button system, it ensures ongoing ease of use. Yet, this is further enhanced by the chainsaw’s automatic oiling system and its tool-free chain tensioning. Done with the twist of a side-mounted knob, it makes operating the saw amazingly easy, and safer.

The 40v battery offers an onboard life indicator to show how many cuts are remaining (it averages 75 per charge).

This chainsaw is also designed for with ergonomically placed handles and shields as well as wraparound designs to enable multiple cutting positions when using the saw from any angle. The 3/8” chain is also designed to reduce or eliminate kick back.

Pros

  • Super powerful battery allows up to 75 cuts
  • Easy start system
  • Automatic oiler and on the fly tension adjustments ensure ease of use

Cons

  • Some complaints of chain jumping
  • Battery power cannot last as long as gas

BLACK+DECKER LCS1240

Another powerful, battery-powered chainsaw, this one also has a 40v, lithium-ion battery that delivers an impressively long run life (averaging 60 cuts per full charge). It too works with the brand’s full line of 40v MAX Lithium Ion powered tools, including all kinds of lawn equipment.

This model also features an automatic oiling system and easy to access, tool-free tensioning adjustments that ensure optimal performance. It is equipped with a 12” Oregon, low kick back bar and chain that can make its way easily through a wide array of challenges. Ideal for limbs and pruning, it is a good choice for the professional landscaper or field worker eager to have a lightweight, safe and reliable chainsaw on hand.

At around ten pounds, it is lightweight and has been designed to offer an easy to maneuver and handle performance. With ergonomic grips and well-placed guards, it can help to make even awkward cutting angles easier to manage. With simple trigger starter, it is also easier to use than pull start models and is the best professional chainsaw for anyone hoping to avoid this sort of issue.

Pros

  • Easy to adjust tensioning
  • Auto oiling system
  • Lightweight and easy to use

Cons

  • Some complaints about auto oiling system
  • Loses power as battery life declines

EGO Power Volt Lithium-Ion Cordless Chain Saw

This brand indicates that it offers “power beyond belief,” which may seem difficult to prove in a battery powered chainsaw. However, it makes this list for many reasons.

The first is that it packs a powerful 56v ARC lithium ion battery that ensures the high efficiency, brushless motor consistently spins at 6800RPM and that cutting power is never diminished. The 14” Oregon bar and chain ensures little kick back but features a chain kick back brake for just such risks. At eight pounds, it is easier to handle and very safe.

Safety is further enhanced by the side-mounted tension adjustment system and the weather resistant casing that allows operation in any conditions. The ergonomic and balanced design ensures safety, too and features a double guard bar and handle along with a narrow-kerf sprocket nose. Starting this chainsaw is simple and requires only the use of the lock and trigger buttons.

With a five year warranty on the saw and three years on the battery, it is an impressive choice that will work well for landscapers, contractors and carpenters, and others.

Pros

  • Long warrantees show manufacturer backs the machine
  • Powerful brushless motor
  • Long-lasting battery with specialized tech for longer performance

Cons

  • Some issues with chain jumping
  • Even with powerful batteries it can still run out of energ

Worx WG322

As already noted, no one is under the misunderstanding that doing work with a chainsaw is easy. No matter what sort of task is being done, it can be difficult and worrisome. This lesser-known manufacturer strives to make chainsaw work as easy and as safe as possible. It does this with a long list of features.

The chainsaw is touted as both compact in size and light in total weight. At just 25” in total length and a weight of less than seven pounds, almost anyone is going to be able to handle it. The bars are mounted for almost any cutting angle or position and the ten inch bar, though unable to tackle large trees, can handle a multitude of other items. Lumber, small trees and branches and other issues can be tackled easily.

The Worx WG322 makes this makes the list because it offers a tool-free tension adjusting options and automatic oiling system, as well. The 20v battery features indicators that show how much life is left to prevent a user from getting stuck half-way through a cut. Like a few other options on this list, the manufacturer  has also designed the battery to be used with other tools, helping owners save money on multiple batteries and chargers. It features a simple trigger start and is unique for its ability to mount to an extension pole.

Pros

  • Compact and easy to use
  • Designed for any cutting angle
  • Battery works across a platform of other tools

Cons

  • Small bar can limit effectiveness
  • 20v battery may not last as long as other battery options

WEN 40417 40V Max

Yet another lesser-known brand, WEN provides a nice alternative. Equipped with a powerful 40v battery system, it is a fade-free lithium-ion model that works across the brand’s Max Series. This saves a lot of money and streamlines the need for chargers and multiple batteries.

However, it is also a well-designed saw that includes a reliable, brushless motor that can make the most of the power available. Paired to the 16” Oregon bar and chain, it spins at 49 feet per second, keeping up with many gas-powered options.

It features an auto oiling system to ensure the bar and chain are in good condition and features a chain brake for optimal safety. There is a tool-free chain tensioning adjustment system mounted to the side of the saw. It has a trigger start and at only 12 pounds is designed for tremendous ease of use. Ergonomic handles and bars ensure almost anyone can easily use this saw for landscaping, carpentry and more.

Pros

  • Long lasting battery
  • Brushless motor ensures optimal fuel usage
  • Ergonomic and lightweight design

Cons

  • May bog at end of battery life
  • Some trigger breakage reported

Blue Max 20160

With this chainsaw, we return to the gas-powered options. This one has a surprisingly powerful 56cc engine (single cylinder, two stroke) that delivers around 10,500 RPM when cutting.

With the 22-inch bar and chain, it offers a lot of cutting capability as well as safety features. It has a low range kick back brake and an auto oil delivery system to ensure the chain is as safe as possible.

The Blue Max 20160 appears in our list because it is equipped with an anti-vibration system that helps users cope with the heavier, twenty pound weight of the machine. Handles have ergonomic design and placement to offer plenty of balance and control, and this is a low-fatigue model.

The pull start system is standard and doesn’t incorporate any aides or tech, but there is simple side-mounted tension adjustment to make tool-free operation possible.

Pros

  • Powerful engine
  • Anti-vibration technologies
  • Ergonomic design

Cons

  • Quite heavy at 20 pounds
  • Pull to start system has some complaints about bad ignition coil

Choosing the Perfect Pro Chainsaw

Now that we’ve gone down the list, and you’ll have a good idea of the most significant features each offers. Yet, let’s still take a quick look at those basic issues that helped us to narrow down the options. These are the factors mentioned in the reviews and the things you’ll want to know about before you begin shopping around for a chainsaw for your business or use.

Know about Engines

You’ve seen gas-powered and electric or cordless models in the list above. While there are those who insist that it is exclusively a gas-powered engine that can give adequate power, we’ve shown in the reviews above that the professional chainsaw could operate on a battery or electrical supply.

What do you need in terms of power? That figure is going to vary based on who you ask. Some professional foresters will insist that 35cc is more than enough and some will argue that 80cc engines are ideal.

The greater the cc, the greater the power. What you can handle and what you need is going to vary from what someone else wants or needs. With that in mind, it is safe to say that you should be able to get long-lasting performance out of options delivering 35 to 80cc.

How do you know the cc when buying electric or battery powered options? The brands make this clear in their descriptions or packaging. For example, it should say something like, the “saw is able to produce the power and performance of a 40cc gas engine”, and so on.

Know about Bar Length

What sort of work will you do with the saw? This is a HUGE factor in the buying process. If you are working strictly with smaller trees, such as those 8-10 inches in diameter, you can opt for a saw with a shorter bar length. However, if you are taking down larger and taller trees, you’ll want a longer bar.

Generally, the rule is that the longer the chainsaw’s bar length, the faster and the deeper you can cut. So, for thick cuts, consider longer bars and for smaller diameter work, feel confident opting for a shorter bar. Generally, you will see that bar lengths on the a professional chainsaws will run from 10” to 24”, though there is some wiggle room.

Know about Handling

It’s safe to say that working with a chainsaw is never easy, but there are ways to enjoy optimal ease of use.

Handling may also mean looking at weights, the placement of handles and grips, and even holding the machine to see how balanced it feels. After all, the best engine and bar length may fail to satisfy you if you are exhausted by trying to wrestle with the machine all day. Additionally, chainsaws that are poorly balanced are dangerous to you.

pro chainsaws

Know about Upkeep

What sort of maintenance will the chainsaw require? While any amount of use is going to have an effect on a chainsaw, you want to make sure that the model you purchase makes it easy for you to do maintenance and/or repairs.

How can you tell? Any machine that is easily disassembled and then reassembled is a good choice. Is it easy to get parts? Make those replacements? What about basic maintenance like sharpening, lubricating and so on?

Generally, the faster and easier that repairs may occur, the better the chainsaw. Yet, do pay attention to any reviews that say the machine breaks down often or is very demanding where maintenance is concerned. You will want to avoid chainsaws that demand too much in order to function safely and effectively.

All the Rest

In addition to these factors, you’ll soon discover that all of the chainsaws have other unique factors that appeal to foresters, arborists and others. These may be such things as extended warranties, bumper spikes, throttle locks, advanced starter systems, safety systems, automatic oilers, anti-vibration features, mufflers, and even heated carburetors (to stop freezing up in frigid temperatures). Does it have a carrying case?

Such factors may, or may not, matter to you when making your choice, but it is a good idea to give them a bit of weight if purchasing your first chainsaw. In the reviews of the top chainsaws, above, we mentioned any of these niceties and extras when data was available.

In Conclusion

As you have learned, choosing the a quality professional chainsaw begins with an honest look at just what you intend to do with the saw. If you are going to use it for light landscaping duties, as part of a carpentry or construction business, and for brush clearing before getting into the heaviest chainsaw work, these options are sure to satisfy. We have also included several that can tackle the biggest jobs thanks to their powerful motors and longer bars and chains.

Should you invest in two? One for the lighter tasks and another for the heavy duty work? Again, that all boils down to just what you need from the chainsaw.

We always recommend ignoring price points until you have assessed just what the individual saws offer. Simply going for the highest or the lowest price will rarely yield a good result.

Instead, take some time to map out what you would like to see in the saw. Will it be better if it can function without a tremendous amount of noise or fumes? If so, one of the battery or corded options is best. Would it be better if you could take down a 40’ hard wood tree easily? Then a gas-powered option with a longer blade is for you. Are you doing a lot of pruning around the home or for clients and you want to make short work of the thickest branches and younger trees? Almost any of the chainsaws here would do the trick.

The good news is that you have a great variety from which to choose listed above. Do try to keep in mind that these professional chainsaw reviews are just a brief assessment of each machine’s most relevant and notable features. We strongly urge you to consider the table of basic data (which shows weight and bar length) as your preliminary tool for narrowing down the options. After all, you don’t want to explore a 20 pound chainsaw if you intend to do little more than light landscaping tasks.

You should also go online to compare and explore each of the options. Saying that a saw has well-positioned handles is one thing, but only you can tell if you like the looks of handle and shield placement.

Start with the basic details provided here, and then use them to narrow down the selection. Then, think about the seasons, challenges and work you’ll do with it before you commit to the best chainsaw based on your needs, budget and goals. It is a good idea to accept that a chainsaw is an essential tool in almost any outdoor professional’s gear. It makes short work of almost any sort of clearing, trimming and pruning, but it can be useful in breaking down old buildings, outdoor furniture and more. With that in mind, you should find precisely what you need

Top 10 Chainsaw Sharpeners for 2019

best chainsaw sharpener

Having a chainsaw can make the outside work around the house quite a bit easier. Whether you have a chainsaw for your own property, or you have a chainsaw that you use in your line of work, it is always important to make sure that you take proper care of it, of course. This includes keeping it nice and sharp, so that it can cut through trees, branches, and more with ease. Let’s look at 10 of the best chainsaw sharpeners that are available today, and then learn more about why it is so important to keep the chainsaw sharp and how to do it.

Best Chainsaw Sharpener Reviews

 NameSharpensStationery or Portable 
Oregon 520-120 Bens Saw Chain Grinder¼”, 3/8” low profile, 0.325”, full profile 3/8”, and .404 pitch chainsStationeryCheck on Amazon!
Timberline Chainsaw Sharpener – 3/16”3/16” carbide cutter for .325” pitch chainsPortableCheck on Amazon!
VEVOR Saw Chain Grinder with Grinding Wheels1/8” and 3/16” grinding wheelsStationeryCheck on Amazon!
Timberline Chainsaw Sharpener – 7/32”7/32” carbide cutter for 3/8” and .404” pitch chainsPortableCheck on Amazon!
STIHL 2-in-1 Easy File Chainsaw Chain Sharpener3/8” chainsPortableCheck on Amazon!
Oregon 410-120 Bench or Wall Mounted Saw Chain GrinderSharpens up to a .404” chain and includes a range of grinding tools.StationeryCheck on Amazon!
Pferd 17301Pferd Cs-X Chain Sharp Filing Guide – 3/16”3//16” filing guide for .325” chainsaw chainsPortableCheck on Amazon!
Granberg G1012XT Precision GrinderTool can hold all stone sizes for standard chain pitches and lowering depth gaugesSemi-PortableCheck on Amazon!
Oregon 541656 16” PowerSharp Starter Kit3/8” low profile pitch for saw sizes up to 42ccPortableCheck on Amazon!
Granberg Bar-Mount Chainsaw Sharpener Model G-106BWorks with any file size and can mount to any sawPortableCheck on Amazon!

Oregon 520-120 Bens Saw Chain Grinder

This is a relatively large Oregon chainsaw sharpener that could be a perfect solution for many out there. This is a high-quality sharpener that is capable of handling a high volume of sharpening, making it a solid solution for just about anyone who has multiple chainsaws that might need to be sharpened. Whether you have a small shop that repairs and sharpens tools, you run a landscaping business or have another need to keep a fair number of chainsaws sharp, this could be just the option you need.

This is a relatively new design for Oregon chainsaw sharpener, and the new engineering ensures that it has better overall performance than older models. This chainsaw sharpening tool comes with a dressing brick, a quick check grinding template, and three different grinding wheels. This makes it capable of sharpening different sizes.

The chainsaw also has a top plate and down angle settings, a self-centering chain vise, and customizable vise handling position. One of the other nice features that many might not appreciate at first is the built-in light. However, this can make it much easier for you to see exactly what you are doing when you are sharpening the chainsaw blade. Being able to see better will also mean some added safety when you are sharpening the chain.

Something to keep in mind with this tool is that it is a stationery sharpener. This means that it will be kept in your shop or garage, and the chains that need sharpening will be brought to it. This is not a portable device. However, for most, this should not be a problem. In fact, it might even be a benefit, since there won’t be any need to transport and potentially lose or damage the Oregon chainsaw sharpener.

Timberline Chainsaw Sharpener with 3/16” Carbide Cutter

Timberline is one of the most recognized names when it comes to these types of tools, and with good reason. This Timberline chainsaw sharpener provides a quality tool that will help to make short work of dull teeth on a chainsaw chain. This is a simple to use, uniquely designed tool that can help to bring those teeth to razor-sharp perfection in a matter of seconds. Each of the teeth, when using this manual device, will be sharpened to the same length and the same angle.

The tool is very lightweight compared to the previous entry on the list, and that is because they work entirely differently. This is a hand-powered tool that is small and that will attach to the chain as it is still on the blade. It is made from machined aluminum, and it is very durable and rugged. One of the other benefits of the smaller size for this sharpener is the fact that it can be taken with you wherever you go. It is easily small enough to take into the field with you, so you can start sharpening the chainsaw no matter where you might be.

One of the other benefits that can come from this high-grade tungsten carbide cutter is the fact that it is so simple to use. With a turn of the handle, you can get the same results on your chainsaw teeth that would normally require a professional. Anyone can keep their chainsaw sharp, and it will take only a few seconds of time.

Something important to keep in mind with this particular tool is that the carbide guides are set at a universal 30-degree angle. However, there are 25-degree and 35-degree guides that are offered separately.

This is a solid option for those who want a tool that is able to help them protect their chains and keep them safe without breaking the bank. It helps them to save both time and money since they won’t have to pay for professional sharpening or keep buying new chains.

VEVOR Saw Chain Grinder with Grinding Wheels

Here is a high-quality, fixed and stationary chainsaw sharpener that can be mounted to either a workbench or a wall, whichever you feel will work best for your needs when you are sharpening the chainsaw blade. The sharpener has an adjustable angle and a large handle, which makes it nice and easy to operate. It is capable of sharpening chains from ¼” to 3/8” pitch. The unit has a powerful motor and it will operate at 3,000 rpm.

The sharpener is very easy to use, and it is even quieter than many might imagine. The machine features a dust and moisture shield, as well, which helps to keep it safe even when the surrounding area might be somewhat harsh.

Of course, one of the best reasons to consider using this chainsaw chain sharpener is because of the quality of the job that it can do. It will take just a fraction of a second to sharpen each part of the chain to razor perfection. You can also be sure that you are getting the right angle. Out of the box, the chainsaw sharpener will be able to sharpen various chain sizes and pitches, which is nice. It will typically only take a few minutes to sharpen an entire chain. This makes it possible to use this in a shop where you might need to sharpen a number of chains in a short period.

The grinder also makes it very easy to swap out blades and to chance the sizes and angles to accommodate all different manner of chains. This is a consistent and durable tool that could be a welcome addition to just about any shop.

Timberline Chainsaw Sharpener with 7/32” Carbide Cutter

Here is another option from Timberline. This chainsaw sharpener features all of the same great benefits that you would expect from Timberline, and you will find that it is very similar to the previous one mentioned on the list. It is capable of providing users with a very simple and effective way of sharpening their chainsaw chains. Users can be sure that the sharpening will be precise and at the same angle.

The tool is very durable; it will go right onto the chainsaw, just as with the other Timberline option above. The main difference will be the size. This is a 7/32” carbide cutter that is for 3/8” and .404” pitch chains. It is nice and easy to use, and it is portable. This is the type of tool that you will want to have in your toolbox, garage, or in your truck depending on how and where you might be doing your work with the chainsaw.

Because of the nature of the way that this tool sharpens the chainsaw chain, it means that only a small amount of material is removed from each of the teeth in the chain. This will help to lengthen the overall life of the chain. It means you will not have to buy chain replacements as often, which should be some welcome news.

Having a quality sharpener that will help to keep your chainsaw nice and sharp is worth its weight in gold. Fortunately, this is made from high-quality machined aluminum, and it won’t cost as much as gold.

STIHL 2-in-1 Easy File Chainsaw Chain Sharpener

When you look at this sharpening option, you will find that it is certainly a bit different from many of the others that are on the market today. It has a unique appearance, and it is truly a unique filing system. It can quickly and easily sharpen the cutter and lower the depth gauge with just a few strokes. It takes care of both of these functions at the same time, which means it will help you to save quite a bit of time and energy.

The system includes two round files, along with a flat file, and it comes with a holder and a filing guide. The STIHL 2-in-1 chainsaw sharpener system will make it easy for users to maintain their chainsaw properly. If you have wanted to find an effective and fast way to keep your chainsaw chain sharpened, this simple tool could be the perfect choice. It will mean less time dealing with a dull blade and more time spent running the chainsaw. This could help you to take care of your work far more quickly.

While this is for a 3/8” chainsaw, there are other STIHL chainsaw sharpener options available today that can work with other sizes. You can find what you need to make sure that you have the right size for your chainsaw.

Oregon 410-120 Bench or Wall Mounted Saw Chain Grinder

This is a quality Oregon chain sharpener that is able to sharpen up to a .404” pitch chain. It features a motor that is built-in and light, which makes it easy to use, and it is very safe to operate. The sharpener is able to mount to a wall or a bench, so it should work with just about any shop or garage.

This chainsaw sharpener comes with three grinding wheels for sharpening, as well as a dressing brick and a quick template. The system also has a new sprocket nose system, which helps to provide better performance, and that can provide a longer nose life. Overall, this is a durable, quality option from Oregon that could be a nice addition to a garage, shop, or wherever else you might need to use it.

Pferd 17301Pferd Cs-X Chain Sharp Filing Guide – 3/16”

When you look at this chainsaw sharpener, made in Germany, you will immediately start to see some similarities between the STIHL 2-in-1 Easy File that is on the list above. They have not only a similar look, but they work in the same manner. This particular sharpener will work with .325” chainsaw chains.

It is a simple to use and portable sharpener that you will want to keep with you. Thanks to the ideal size, you should not have any trouble keeping it in the toolbox, a glove compartment, or just about anywhere else. It is a handy tool to have around, allowing you to keep your chainsaw sharp even when you are out in the middle of a job. This is a better solution than needing to stop working so you can come back to the garage or shop to sharpen the chainsaw.

Granberg G1012XT Precision Grinder

There are quite a few things to like about this grinder. The device is capable of sharpening all saw chains, and it can fit all of the various stone sizes for chainsaw sharpening. In fact, it even comes with a 5/32”, 3/16”, and a 7/32” stone. It features a Kevlar reinforced belt drive, heat resistant polycarbonate case, and high-speed micro ball bearings.

The tool is something that can be considered semi-portable, as well. It is a 12-volt 24,000 rpm motorized sharpener. It is corded, as well, which means that it is not entirely stationary. It can be brought out of the garage, as long as there is a place where it can get the power it needs. The power cord that comes with the device is 8’ long, and it has an alligator clip to attach to any 12-volt battery. This helps to make it even more portable.

Users who choose this option will find that it is very easy. They can use the calibrated swivel guide markings, which will then allow them to set and hold the ideal sharpening angle easily. It is also easy to see the tooth length and file height. This easy to use electric chainsaw sharpener could be an ideal solution for your needs. It is high-quality, and it should last a long time with proper care.

Oregon 541656 16” PowerSharp Starter Kit

This chainsaw sharpener is different from the others that are on the list, but it could be the type of sharpener that works well for your needs. It is a fast and simple tool to use, and you will keep the chain right on the saw when you are using it. It has the potential to take a dull blade and make it sharp in just about three seconds. It also comes with the PowerSharp 3/8” pitch low profile chain.

The chainsaw is placed in the sleeve, which can go on securely thanks to the alignment guide holes at the top of the bar. It should be easy to get it into place, and then to press the tip of the sharpener against a solid surface while running the chainsaw for between three and five seconds. That is all it will take to sharpen the chain. The kit is available in several other sizes for different length bars. The one here is for a 16” bar, but there are also options for a 14” bar and an 18” bar.

This Oregon chainsaw sharpener will work with a wide range of different types of chainsaws. Just be sure that you have the right size started kit for your needs.

Granberg Bar-Mount Chainsaw Sharpener Model G-106B

This is a high-quality easily portable option for those who are looking for a chainsaw sharpener. It is able to sharpen any chain quickly and easily, as it has the capability of mounting to any saw with any file size that you need. There are not any files included with this sharpener, so you will need to buy them separately. Make sure that you choose a file that will work with your chainsaw chain, and you should not have any problem using them with this tool.

The chainsaw sharpener has a very “old school” or traditional look to it with good reason. It has been in use for more than 35 years, and it has become one of the standards in the field. You can use this tool to get a nice, sharp chain with little time and effort. It can work for all file sizes for standard chain pitches and lowering depth gauges, and it uses calibrated swivel guide markings to ensure the correct sharpening angle.

The sharpener is made from cast aluminum and zinc-plated steel. It is highly durable, meant to last, and can be a good option for those who are looking for a reliable sharpener that they can add to their set of tools. It can make easy work of getting a sharper chain.

Should You Choose a Portable or a Stationery Type of Chainsaw Sharpener?

As you have seen, there are several different types of chainsaw sharpening tools that are available today. However, you can generally narrow them down to a couple of basic types. There are those that are mounted and those that are portable or semi-portable. Out of those three categories, there will be those that are handheld, as well as those that are bar-mounted guides, and electric chainsaw sharpeners.

Let’s get a closer look at these types of sharpeners for chainsaws to see which one might work best for you.

Bar-Mounted

The bar-mounted guides will typically attach to the bar on the chainsaw, and once they are set, you can use the knobs or dials to ensure that it is filing at the right depths and angle. Then, utilize a hand crank that will move the saw through the sharpener. These will typically require a flat or stable surface. These have the potential to provide precise sharpening, and they are a fast way to get the chain sharp quickly. They are an efficient option, but because they will often need to be mounted to something, they are not as portable as you might need.

Electric Chainsaw Sharpeners

These types of chainsaw sharpeners are popular because they are easy to use, and they tend to provide a fast way of getting the chain nice and sharp. They do tend to be costlier than the other options on the market, but it will depend on the make and model. There are a number of quality choices available.

Handheld Files

These are some of the most common types of chainsaw sharpeners, and they have been around for a long time. These are a simple sharpener that is easily transportable. There are files and sharpeners of different sizes and styles to work with different chains. These tend to be the most affordable option for chainsaw sharpeners, but they will also take longer when it comes to actually sharpening the blade. They are good to have on hand, though.

Regardless of what type of chain sharpener you end up using, it is important that you always take the time to read and understand the instructions from the manufacturer before you start. Safety is important no matter whether you are running the chainsaw or sharpening it.

You might even find that rather than having just a single type of sharpener, you might want to have more than one. You may want to have a mounted chainsaw sharpener that is in your garage, for example, but you might also want a handheld option that you can take with you for some sharpening when you are out in the field. This will likely be more convenient than needing to come all the way back to the shop with a dull blade.

Tips for Sharpening a Chainsaw Safely

Sharpening a chainsaw chain might not seem like it could be dangerous, but that’s not true. There is always a risk of cutting yourself or getting something in your eyes. Therefore, you will want to make sure that you take some basic precautions for safety when it comes to using the sharpeners.

In addition to reading and following the manufacturer’s instructions, mentioned above, you also need to have the right safety gear. Some gloves and safety glasses are generally all you will need. This will reduce the risk of getting cut or of having metal shavings that get into your eyes.

It is also important that you respect the sharpness of these chains. Even when they are “dull”, they can still tear and pinch skin if you are not careful. Take your time and sharpen the chain properly. Rushing is one of the problems that can often cause accidents and injuries.

Why Do You Need to Keep the Chainsaw Sharp?

Just how important is it really to make sure that you keep your chainsaw chain sharp? When you have a chain that is starting to get dull, you are going to feel it. You will find that you will not have the same amount of power and speed that you usually have with the chainsaw. The chainsaw might even bind as it is trying to cut, and the motor could even overheat in some cases.

When the chain is sharp, it will essentially pull itself through the wood. This will make sure that your cuts are clean and that they are straight. A sharp chain also reduces the risk of breaking a chain. Dull chains are imprecise, and they will slow you down quite a bit. You want to avoid these issues at all costs, and you don’t want to keep replacing the chains. Instead, you need to have a good sharpener. This will allow your chains to last a lot longer, and it will speed up the work that you are doing. If you let the chain go dull, you are simply not using your chainsaw to its full effectiveness.

Some Parting Safety Tips

The bulk of this article has been about finding the perfect chainsaw sharpeners and then learning how important it is to make sure that the tool is always sharp. However, with these sharp and dangerous tools in your hands, it is important to remember some simple and highly important safety tips that you will want to keep in mind.

Whenever you are using any type of powerful tool like this, read and understand the owner’s manual. Make sure you have proper safety gear. This includes goggles, boots, gloves, a hard hat, gloves, and hearing protection. Make sure you are keenly aware of your surroundings so that you are certain there are no people or pets near you that could get in the way. However, you should have someone who is in the area, who can provide help in the event of an accident. You also need to watch where your feet are and what you are standing on, to ensure that you do not slip with the chainsaw. These are just some of the basic tips that you will want to keep in mind.

Find the Chain Sharpener for Your Needs

Now that you have a better idea of the top 10 chainsaw sharpeners that are on the market, and you know more about what they are and how they can be used, it is time to get your own. Take some time to look at the options that are available, consider your chainsaw and how much sharpening you need to do. A good sharpener can last you a long time.

11 Best Electric Weed Eaters for 2019

best electric weed eater

The term weed eater can be confusing because the equipment doesn’t really take in the weeds and other materials. Instead, it pulverizes them and cuts them low to the ground. Often, this can be enough to destroy unwanted weeds or growth, or just tidy up the landscape. And just as you’ll find almost any modern landscaping equipment in gas and battery powered options, so too will you find both gas and electric weed eaters. In this article, we’ll focus exclusively on the best electric weed eaters for 2019.

It is more difficult than many imagine when it comes time to narrow down the options and choose the an electric weed eater. After all, there are many different features that the various models provide. After all, they come in various sizes, strengths and designs, and some are ideal for those with only limited lawns while others could be used for professional work. Some are amazingly easy to use and others less so. Our goal is to first introduce you to the best rated and most popular options on the market.

Then, we will go over all that you need to know and consider when making your choice on a weed eater.

In the list below, you will see many familiar name brands, as well as a few lesser known manufacturers. All of the weed eaters, however, will be full of features and functions that ensure the best results, whether you are new to lawncare or an expert. Let’s look at the top electric weed eaters and then what is important to consider when narrowing down the options.

The Best Electric Weed Eater for 2019

 NameHead TypeWeight 
Black+Decker Lste525Easyfeed6.3 lbs.Check on Amazon!
Greenworks 12-Inch 40v Cordless String TrimmerAuto-Feed Head9.2 lbs.Check on Amazon!
Dewalt Dcst970x1 FlexvoltBump Feed12 lbs.Check on Amazon!
Worx WG184Inline-Feed Mechanism6.5 lbs.Check on Amazon!
Makita XRU02ZBump Feed6.9 lbs.Check on Amazon!
Black+Decker Lst136Auto-Feed Head7.8 lbs.Check on Amazon!
Ego Power+ Cordless Powerload String TrimmerPowerload Head13 lbs.Check on Amazon!
Worx Wg154Auto-Feed Head6 lbs.Check on Amazon!
Remington RM2700 Ranchero 18-Inch Gas Powered String TrimmerBump Feed9.9 lbs.Check on Amazon!
Poulan Pro Ppb40tBump Feed9.7 lbs.Check on Amazon!
Craftsman Cmesta900Auto-Feed Head6.8 lbs.Check on Amazon!

BLACK+DECKER LSTE525

Part of the Black+Decker 20v MAX line of lithium-ion powered tools, this is called an “easy feed” trimmer and edger for its ability to switch into a lawn edger by adjusting the head position. It stands out for more than just this flexibility, though since it also has many other unique features.

These include the EasyFeed tech that sends out more line with the press of a button on the handle. Cutting a 12” swath it is also very flexible whether working in a tight spot or a more open area. This rates as one of the very top electric weed eaters because it also has an adjustable height and handle that makes it comfortable for a user of any height as well as for any purpose.

The PowerDrive transmission also uses the engine’s torque when needed to power through more difficult tasks. Users can also select from two speeds to opt for more power or for a longer run time on the battery.

It is designed with a textured soft grip handle that enables optimal comfort whether wearing gloves or going bare handed.

Pros

  • Remarkably adaptable to many tasks
  • Adjustable power consumption
  • Torque boost to help with difficult work

Cons

  • Some complaints about battery life
  • EasyFeed has been known to jam

Greenworks 12-Inch 40V Cordless String Trimmer 2101602

This Greenworks model 2101601 is also powered by a battery that works with a full line of tools. Considered one of the largest, the 40v battery offers twice the power and can handle up to ½ of an acre of work on a single charge (roughly one hour of work).

With its 12” cutting path, it is flexible enough for big or small jobs, and at 15 pounds, the unit is easy to handle. The automatic line feed is a low maintenance way of keeping the machine up and running and this model has been ergonomically designed with the weight balanced fully from end to end.

It rates at the top of the list for its variable speed trigger that allows blasts of power when needed, and yet this is a quiet running weed eater. The rotating head also makes it easier to customize the work, even achieving some tasks similar to edging.

Pros

  • Big batter and powerful motor get the work done
  • Rotating head for adaptability
  • Lightweight and well designed

Cons

  • Some complaints that battery is tough to remove
  • Limited guard coverage

DEWALT DCST970X1 FLEXVOLT

For those who are in need of lots of power, this is likely to be the electric weed eater for you. With its 60v lithium ion battery that works with the different DeWalt Flex Volt equipment, it promises a lot of time on the job. The brushless motor backs this up and operates at optimal efficiency while ensuring longer motor life.

This model has a larger 15” cutting swath that can tackle big jobs easily, and with a variable speed trigger it allows for a great deal more control over the results as well as the run time.

Quieter than equally powerful machines, it starts and stops with the click of the trigger. Ergonomically designed and reasonably lightweight, it reduces stress on the shoulders, neck, back and arms and yet can tackle heavier duty tasks and work. In fact, it is gear driven to ensure users can power through even dense growth or coverage.

Pros

  • Powerful gear driven functions
  • Brushless motor for maximum efficiency
  • 15” cutting swath

Cons

  • Bump feed can be annoying
  • Some complaints about battery life

Worx WG184

One of the many machines in the Worx power share line of tools and gear, this one uses dual 20v batteries to deliver impressive power. Like other options in this list of the best weed eaters for 2019, this model also switches from an inline trimmer to a wheeled edger with a few clicks and changes.

It is similar to a gas-powered model for its variable speed trigger and is able to work for up to an hour or tackle have of an acre of non-stop work. It uses a command feed spool system that operates like an auto feed, but which operates with a few clicks on the handle – blending the best of bump and auto solutions.

This model features a straight shaft with accessory wheel for storage and is ergonomically designed and light in total weight for optimal control and ease of use.

Pros

  • Part of the brand’s power sharing system of tools
  • Long lasting charge
  • Converts to edger easily

Cons

  • Some complaints about edger
  • String control switch requires a bit of a learning curve

Makita XRU02Z

This is part of the Makita brand’s line of 18v lithium-ion powered tools and equipment. It uses their proprietary motor offering 7800 RPM for optimal cutting. The ergonomically designed shaft telescopes to adjust to height or the task a hand and a pivoting head ensures optimal control in even delicate maneuvers. It features a 10.25” cutting swath for maximum control.

At only six pounds, this weed eater is perfect for those worried about arm or shoulder fatigue. The battery lasts for around 30 minutes of non-stop use and includes the brand’s Star Protection computer controls that ensure the battery will not overload or overheat, or even discharge too quickly.

This features an easy to load head that requires bump feeding, and the handle is also adjustable to a user’s height. Controls at the handle make it easy to operate and keeps weight balanced at all times.

Pros

  • Well designed and easy to use
  • Adjustable shaft and handle
  • Powerful motor

Cons

  • Some complaints about bump feed
  • May fade with loss of battery charge

BLACK+DECKER LST136

The Black+Decker LST136 is known for its innovative PowerDrive transmission that knows when to send more power to the cutting end and when to back off. It is part of the brand’s 40V Max system, meaning the battery is interchangeable with an array of other tools.

The battery delivers a very long run time, and manual PowerCommand controls allow the operator to choose when to favor power and when to favor runtime.

This features an adjustable head that converts with a quick turn from a trimmer to an edger and the auto feed head makes it easy to get the work done in any format. A 13” cutting swath ensures optimal function, and this machine is noted for its easy to replace spools.

Pros

  • Part of the trusted 40V MAX system
  • Adapts to trimmer mode with one gesture
  • Flexible power controls

Cons

  • Some issues with the auto feed releasing too much string
  • Lags towards end of battery life

EGO Power+ Cordless Powerload String Trimmer

This model takes its name from the powerful brushless motor that allows it to operate for much longer periods of time than other, similar models. With manually controlled speeds, it enables users to power through even difficult materials.

This model is unique for its Powerload Head that enables users to load the line, push a button on the handle and get to work. It features a dual strand and is a 15 inch swath. The large shield ensures no kick up or debris issues, and the adjustable shaft enable this to be used by people of all heights.

A carbon fiber shaft, it is able to support any position, and the nicely balanced head and controls reduce instances of fatigue.

Pros

  • Wide swath gets a lot of work done
  • Carbon fiber construction
  • Single button line feed

Cons

  • Battery and charger sold separately

WORX WG154

This brand is noted for its weed eaters, and this model rates as one of the best weed eaters for 2019 because it is such a flexible option. With a cutting swath of ten to twelve inches, and as part of the PowerShare line of 20V lithium ion powered machines, it is a real money saver.

It also converts from a weed eater to an edger in just a few seconds and will adapt to a wider cut or an extended run time based on user’s preferences. The ergonomic design includes a straight shaft and fixed handle with nicely balanced bars for comfort at any angle.

The automatic feed uses a single line and the head rotates for optimal performance. Light in total weight at only six pounds, it can still do a lot of work on a single charge.

Pros

  • Flexible performance options
  • Part of the PowerShare line that saves a consumer money
  • Reliably long charge

Cons

  • Some complaints about the handle
  • May experience lag at end of battery life

Remington RM2700 Ranchero 18-Inch Gas Powered String Trimmer

This electric weed eaters is perfect for professionals thanks to its powerful ten amp motor, 18” cutting path and attachments.

Users will appreciate the simple electric start that features cord lock feature that holds electrical cords out of the way and enables uninterrupted use. This model also has a quick connect coupler that enables the machine to be converted into a number of other tools, including a blower, hedge trimmer, edger, rototiller and more.

A dual line, bump feed head gets the work done quickly, and the entire unit is designed with ergonomics and comfort in mine. It features cushion and over-molded grips on the handles, as well as an extra handle for more support when extending and reaching.

Though it is powerful it is also quieter than any gas model and benefits from a constant power supply.

Pros

  • Corded to eliminate lag from batteries
  • Powerful 10 amp motor
  • Compatible with a long line of attachable tools

Cons

  • Bump feed
  • Two-part shaft may not satisfy all buyers

Poulan Pro PPB40T

A feature-rich weed eater, this model has all kinds of innovations and tech. It features a dual exit bump feed head with the brand’s trademark “Tap n Go” tech that makes line replacement a breeze. It has a 14” cutting path to allow for even delicate work, and its brushless motor can power through anything.

It is a quiet machine and relies on the 40v battery for long-lasting performance. It features a push button start and is ergonomically designed with an adjustable shaft, controls at the handle/head, and a lighter weight.

Attachment capable, it can also be turned into a long list of other gear, including an edger, rototiller, blower, trimmer and much more.

Pros

  • Powerful and efficient
  • Easy to use
  • Full of innovations

Cons

  • Charge suitable to smaller yards
  • Adjustable shaft may flex

CRAFTSMAN CMESTA900

One of the most noted names in equipment, this trimmer offers up a 13 inch cutting path that is maintained from the single line auto feed head. It converts with a single twist to an edger and can run for hours on a standard electrical supply.

Ergonomically designed, it features an adjustable shaft, large handles and easy single press controls that start and adjust the speed of the line. Simple to use and lightweight, it is ideal for small yards and garden work.

Pros

  • Adapts to an edger easily
  • No worries about batteries
  • Ergonomic and easy to use

Cons

  • May not be powerful enough for some
  • Corded, which some users dislike

Choosing a Electric String Trimmer

Now that you are familiar with electric weed eaters, and you understand some of the more relevant features they offer, it is time take a deeper look at those basic factors. These are the various “pros and cons” mentioned in the reviews and you definitely want to know about them as you begin shopping around for a quality electric weed eater for your home or property.

Know about Weed Eater Heads and Lines

Most weed eaters use string or line to do all of the chopping. The lines spin at high speeds and when they come into contact with plants, it is the line that mows them down. There are, as you have seen, a few ways that the lines are managed by the weed eater. These include:

  • Bump Feed – As the name implies, you will just knock the head gently on the ground and it releases a length of line. Since lines break off in small pieces as they are worn down, you have to bump it to release more, and will have to change out the empty spools periodically – some far more often than others.
  • Auto Feed – This uses a similar design as the bump feed heads but does not ask much of you apart from replacing the spool or line once it has run out.
  • Fixed – This uses a different type of line that doesn’t snap off or wear out so easily, and which will need to be replaced from time to time.
  • Other – There are some proprietary designs mentioned in the reviews above and they are hybrids of all types of heads, though they work the same by using lines to do the cutting.

Of course, the type of head is not the only issue. You also have to consider if the weed eater uses a single or double line. Does it have an easy mechanism for re-filling it with new line. And even more importantly, what is the width that the line clears in a single sweep. Average widths are around 13.5 to 14”, but if you have tight spaces, you may want to look at smaller cutting path models.

Know about Batteries and Power Supplies

Electric weed eaters use batteries or electrical cables to get the job done. This means that there will be a need to charge the batteries and monitor their overall health or wrangle an extension cord. Some battery-powered machines use higher voltage batteries that can work for greater periods of time and others have very weak batteries that can manage only a short period of use before wearing out. The corded options may have handy cord locks that eliminate any risks of tripping, but others don’t.

best electric string trimmer

With battery powered options, you always want to get the most out of a single charge, but you’ll have to consider the amount of work you’ll ask the weed eater before making your choice. For example, a short front walkway and a few areas of trimming won’t demand a high-powered battery. A large lawn with lots of beds and trimming, on the other hand, calls for a bigger amount of energy.

If you are worried about the risks of energy loss or lag, go with the corded models.

Know about Ergonomics

If you have no history with the use of weed eaters it may come as a surprise to learn that even some of the great electric weed eaters put a great deal of strain on the user’s arms and shoulders. That is why it is important to choose a model that is tall and long enough, properly balanced in terms of weight and layout and even with an angled or straight staff based on your needs.

As a simple illustration of this, let’s say you need to use the weed eater you can find to work beneath the shrubs at the front of your home. A long and straight shaft may be the ideal design for you, however, if you are very tall and will be using the weed eater for more general work, a curved shaft is a wiser choice. Even better is the weed eater with adjustable settings.

Weight is also part of the ergonomics of the good electric weed eater. Many machines are top heavy and tiring to use. You want to find one that has balanced weight as well as a weight that won’t tire you out simply because it is higher than normal. Imagine holding out a ten pound bag of flour around a foot or two in front of you…that can get tiring, and so you want to consider weight as part of the overall equation.

All the Rest

There are not many extras in the world of electric weed eaters, but we would recommend you pay attention to the following issues:

  • Warranty
  • Switchable heads (such as those that can turn into edgers)
  • Battery systems that work within a platform of yard equipment (saving money on multiple battery and charger purchases)
  • Customer support
  • Ability to get or make repairs
  • Capable of accepting add-ons and attachments

Each of these are as relevant as the other factors above and should be part of your decision making process.

In Conclusion

We’ve now gone over all that you need to know to choose your electric weed eater for your home or property. As we said, start with the question of “what will I do with this machine?”. If you will do that light trimming, almost any of these options will suffice. If you are going for the gusto and aiming to do a lot more with a single unit, think about the attachment-capable models.

Also make power consumption a major factor if you hate waiting around for batteries to charge in the middle of your day of gardening. You can always buy spare batteries and keep a couple of fuel cells charged and ready.

You should also go online to compare and explore each of the options. Our explaining that something is ergonomically designed is one thing, but only you can tell if you like the looks of handle the placement of controls, and so on.

Lastly, if you have a way of actually holding the garden tool for your needs before you buy it, do so. Now is the beginning of garden season and the perfect time to test out a few weed eaters and find the one that will help you enjoy the easiest year of upkeep possible.

Top 10 Best Drill Presses for 2019

best drill press

From removing wheel bearings to drilling through metal, wood, glass, stone, tile and other materials, drill presses serve a broad range of functions in professional settings as well as within home shops. Of course, there are plenty of models on the market and it can be confusing to compare motor sizes, bases, speeds, work surface adjustments, and other features to make an informed purchase decision. Our guide walks you through the top models on the market to help ensure that you’re able to get the best drill press for your needs, whether you’re using it at home or in a professional shop. You’ll find the 10 drill press models we’ve ranked below in a head-to-head comparison table.

Best Drill Press for 2019

 NameMotorSpeedsDrill DepthWorktable Bevel 
WEN 42081/3 HP induction52 inchesYesCheck on Amazon!
Dremel 220-1N/AN/A2 inchesNoCheck on Amazon!
SKIL 3320-11/2 HP5Not listedYesCheck on Amazon!
WEN 42142/3 HPInfinitely variable3-1/8 inchesYesCheck on Amazon!
SHOP FOX W18483/4 HP123-1/4 inchesYesCheck on Amazon!
NOVA 58000 Voyager DVR1-3/4 to 2 HP (110v-220v)VariableNot listedYesCheck on Amazon!
ShopSeries RK70336.2 amp52 inchesYesCheck on Amazon!
General International 75-010 M11/3 HPVariable3 inchesYesCheck on Amazon!
DeWalt DWE1522K10 amp24-3/8 inchesNoCheck on Amazon!
JET J-25303/4 HP163-1/8 inchesYesCheck on Amazon!

Now that we’ve compared drill press models, it’s time to dive into each one to determine what they deliver and how they compare to one another with more in-depth drill press reviews.

WEN 4208 8-Inch 5-Speed Drill Press

The WEN 4208 could just be the best benchtop drill press. At least where our review is concerned, it takes top honors. The 1/3 HP motor is more than ample for most jobs, and the worktable offers up to 45-degree beveling right and left so you can always get the perfect angle on the job. With five speeds and the ability to drill down up to two inches, it’s a great option for just about any home workshop, and also makes a great addition to professional shops. This drill press also features a locking linear depth stop to make repetitious jobs simpler and easier. The worktable measures 6.5 inches by 6.5 inches, so while it is not massive, it is amply sized for most projects you may undertake. It also features an eight-inch swing and a 1/2-inch keyed chuck with key storage built into the unit.

Dremel 220-01 Rotary Tool Workstation Drill Press Work Station with Wrench

Ok, this entry to our drill press reviews might be a bit confusing. It’s not actually a drill press. Instead, it’s a workstation designed to turn your existing Dremel tool into a drill press. Note that this item does not include a Dremel at all – it is only the workstation. The Dremel 220-01 Rotary Tool Workstation Drill Press is compatible with most Dremel Rotary Tools on the market, including models:

  • 100
  • 200
  • 275
  • 285
  • 300
  • 395
  • 398
  • 400
  • 800
  • 3000
  • 4000
  • 4200
  • 8100
  • 8200
  • 8220

Simply insert your compatible Dremel tool into the workstation and you have the ability to drill, grind, sand, and more. The tool is held at a 90-degree angle and delivers a drilling depth of two inches. It’s also capable of articulating in 15-degree increments up to 90 degrees. The workstation ships with a Flex Shaft Tool, which is a nice addition for Dremel owners who do not yet have one. Note that this is at tabletop drill press and the worktable does not bevel.

SKIL 3320-01 3.2 Amp 10-Inch Drill Press

Looking for a powerful drill press that will help you get done, fast? The SKIL 3320-01 delivers plenty of power (3.2 amps) and stands a full 10 inches high. This is another tabletop drill press, but the worktable does bevel (up to 45 degrees right and left). This drill press features five speeds, from 570 RPM all the way up to 3050 RPM to suit the material and your needs. It also comes with a Laser X2 2-Beam sighting system that puts the power of laser aiming in your hands for incredible accuracy with every job. There is a bump-off switch for increased safety, and the unit features a 1/2-inch keyed chuck. The adjustable depth stop also helps with repetitive tasks.

WEN 4214 12-Inch Variable Speed Drill Press

The second WEN drill press to make our list, the WEN 4214 12-Inch Variable Speed Drill Press is one of the larger tabletop drill press models we reviewed. It stands a full foot tall and has the heft you need for stability during operation. This is a good drill press for both professionals and serious home users, and it delivers quite a few features and benefits. The motor features infinitely adjustable speeds from 580 RPM all the way up to 3200 RPM, and torque remains consistent at all speeds. Check your RPM with the handy LED gauge. The linear locking depth stop makes repetitive tasks simpler while the 9.5-inch by 9.5-inch worktable offers ample space for even larger projects. Note that this particular drill press has a 5/8-inch keyed chuck (includes the tool). This drill press also comes with a laser sighting system to improve accuracy.

SHOP FOX W1848 Oscillating Floor Drill Press

The largest drill press to make our review, the SHOP FOX W1848 Oscillating Floor Drill Press is a freestanding model that does not require a table for operation. It stands 63 inches tall. The 3/4-HP motor delivers more than enough power for just about any project you might have in mind, and it also features a 1/64-inch to 5/8-inch chuck. With 12 speeds from 250 RPM to 3050 RPM and a table over 12 inches in size, this drill press is more than capable. Note that in addition to being used as a traditional drill press, the oscillating feature makes it ideal for use as a sander, and can be converted from drilling to sanding without any tools, in a matter of seconds. In fact, it actually ships with a three-piece spindle sander drum kit.

NOVA 58000 Voyager DVR Drill Press

Another floor standing drill press, the NOVA 58000 Voyager DVR Drill Press brings a lot of power and capabilities to the table. While it might be the most expensive item to hit our list of drill press reviews, it is perhaps the most capable model we’ve seen. It features the ability to run on 110v or 220v, which changes the motor capacity from 1-3/4 HOP to 2 HP. It’s also a direct-drive motor, and there is a speed range of 50 RPM all the way to 5500 RPM. The worktable is highly adjustable and very large, as well. However, the real benefit here, other than the high-capacity motor and the large size, is the software that comes with it. This is a highly-computerized, almost automated, drill press that delivers everything from constant performance monitoring to drill bit selection assistance to make it simple and easy to work with almost any material, from wood to metal to tile and glass.

ShopSeries RK7033 6.2-Amp 10-Inch Drill Press

With its 6.2-amp motor and two-year limited warranty, this drill press is a worthy contender for your attention. The ShopSeries RK7033 stands 10 inches high and is designed to work as a tabletop drill press. The base is heavy enough to provide ample stability, but it can also be permanently mounted in place. The worktable bevels up to 45 degrees left and right, and is made from cast iron for durability and additional heft. The motor features five speeds, from 620 RPM to 3100 RPM, and the unit features a 1/2-inch drill chuck. While it does not feature a laser sighting system, it does have a built-in LED light to help make it easier to see what you’re working on. One very interesting aspect of this drill press is that it can use either AC or DC power – it can plug in, or it can be used with a 1.3Ah lithium-ion battery (included).

General International 75-010 M1 Bench-Top Drill Press 12”

Standing a full 12 inches tall, the General International 75-0101 M1 is a benchtop drill press in retro green. However, don’t let its good looks fool you. This is a very capable machine and features a cast iron head, base, and worktable to ensure plenty of stability while working. It includes a safety feature most of those on this list do not – a forced opening line interrupter switch. In the event of a power failure, the machine must be manually restarted. It will not automatically start back up. It also offers speeds from 500 RPM to 3000 RPM, and comes with a built-in laser sighting system. The heavy-duty 3/4-HP induction motor is designed to deliver worry-free performance for years to come, and the unit features a 5/8-inch chuck.

DeWalt DWE1622K 2-Speed Magnetic Drill Press

The DeWalt DWE1622K 2-Speed Magnetic Drill Press is like nothing else on our list. It’s designed for tremendous portability and can be taken anywhere there’s access to a standard power outlet. The magnetic base clamps onto metal work surfaces, allowing the powerful motor to bring the drill to bear. The unit offers only two speeds – 300 or 450 RPM – combined with plenty of torque. The magnetic coolant bottle can be added to the right or left side of the drill to suit usage needs. It also uses a 1/2-inch keyed chuck, and comes with a safety chain and height adjustment tool.

JET J-2530 15-Inch 3/4 Horsepower 115-Volt Bench Model Drill Press

The final entry to our drill press review list, the JET J-2530 remains an excellent purchase decision despite falling in last place here. The cast iron head offers stability and durability, while the large quill is good for improved drilling accuracy. The table bevels 45 degrees left or right, and the base features mounting options to suit your installation needs. The 3/4-HP motor delivers plenty of power and performance, and you can choose from 16 different speeds to suit the material you’re working with and your production needs. It includes a light, but no laser sighting system. The worktable measures a generous 10 inches by 10 inches, and the head swivels 360 degrees.

As you can see, there is a drill press for just about any needs. Whether you’re interested in a high-performance tabletop drill press, prefer a floor standing unit, or want something that will allow you to get more out of your existing Dremel tool, it’s on our list. With all that being said, there is more to choosing a drill press than just comparing the units on the market. Below, we’ve included a buying guide to help you learn more about the various features and selling points of the drill press models on the market.

Drill Press Buying Guide

Finding the drill press for you requires that you know a bit more about the various features, functions, and capabilities on offer with the many different models on the market. It also requires understanding a bit more about your own needs and how a drill press might suit those needs. In our buying guide, we’ll walk you through the various things that you need to know in order to make an informed purchase decision.

What Is a Drill Press?

A drill press is, well, a drill that can be pressed downward via a manual or automatic control. At their heart, drill presses are about drilling, although many models can also do a number of other things, such as sanding. Drill presses were designed to help eliminate errors and speed up the process of drilling holes in a wide range of materials, although wood and metal are perhaps the two most common. By using such a device, holes are accurately placed, straight, and precise. Depending on the machine in question, it is also sometimes possible to create angled holes. You’ll find these machines used by a wide range of people, from woodworking professionals to automotive mechanics to gunsmiths. They’re also used in both professional settings and in home workshops.

How Does a Drill Press Work?

Drill presses are actually relatively simple devices. The head is the top of the machine and it contains the drill, the controls, and the drill bit. A worktable is usually positioned below the head. Some units have a base as well, but others use the base as the worktable. To use the drill press, you simply place the material you want to drill on the worktable, with the area to be drilled lined up with the drill bit. Then, turn on the drill, choose the speed you want, and lower the bit. As you lower the head unit, the drill bit will cut through the material. When you have drilled out as much as you desire (or drilled through the material), simply pull the head back up.

man using a drill press

What Materials Can a Drill Press Use?

Drill presses can be used with a very wide range of materials. Wood and metal are the most common, but others can also be used. For instance, several of the models in our drill press review are capable of drilling not just metal and wood, but also stone, tile, glass, plastic and more.

What’s the Difference between a Tabletop Drill Press and a Floor-Standing Drill Press?

Take a look at the available drill press models on the market and you’ll find them split between tabletop drill press designs and floor-standing models. What’s the difference? Tabletop units are designed to be mounted to a worktable or other surface. They usually stand up to 12 inches tall. Floor-standing models can be up to 63 inches tall (or more in some cases) and are usually much heavier than tabletop drill press models. In most situations, a tabletop model will be more than sufficient. However, if there is no table or work surface or putting one in place is not an option, or if you have high-production needs, then a floor-standing unit may be the best option. We included a couple of different floor-standing drill presses in our review for just that reason.

What Are the Most Important Features?

When comparing your options to find a drill press, you’ll want to consider some crucial features.

Chuck Size – The chuck size will dictate the size of the tools that you can use with the device. The most common sizes are 1/2-inch and 5/8-inch. These are analogous to conventional drill chucks, as well. A specific chuck can use drill bits and other attachments up to the listed size. For instance, a drill press with a 5/8-inch chuck could use a 5/8-inch drill bit or smaller, while a press with a 1/2-inch chuck would top out at 1/2-inch bits and smaller.

Work Table Size – The size of the worktable is important because it touches on usability and productivity. The larger the table, the better, because you can fit larger items under the press, and long items will have more support. However, a larger table is not always better. Ideally, you’ll have a good idea of what size pieces you will be working on regularly so you can make an informed choice here.

Work Table Bevel – Most drill press models on the market offer beveling work tables, but that’s not true across the board. There are two on our list that do not bevel, for instance. Beveling is simply the ability to tilt the table left or right so you can angle the hole you’re drilling, and is measured in degrees.

Tabletop or Floor – For most buyers, a tabletop drill press will be more than enough. However, if you have limited space, high-production needs, or want to take advantage of greater power output, then a floor-standing model might be better. Again, know your needs and how you want to use the press to answer this question.

Motor Power and RPMMotor power is very important. The higher the horsepower, the higher the RPM will be. However, you also need to consider torque and how it is provided across the power band. Ideally, you’ll buy a model that delivers the same level of torque at all speeds. Also note that high RPM is not always the best option. A lot depends on the material you’re working with, so know your needs.

Repetitive Tasks – Often, drill presses are used to increase accuracy and decrease worker fatigue during repetitive tasks. Look for a model that includes a linear locking mechanism so you can “set it and forget it”. This allows you to set the drill at a specific height and then complete your entire production run without having to adjust it frequently. That saves you a lot of time and hassle, and can increase your productivity significantly.

Accuracy – Being able to accurately drill is the entire point of a drill press. However, some units are easier to use than others. A laser sighting system is a great option. However, you may not need that level of accuracy. In that case, you might consider a drill press with a built-in light that helps ensure you’re able to see what you’re doing.

Conclusion

When it is all said and done, the best drill press for one person might be the wrong press for another. It really comes down to your usage needs, installation space, and intended materials. Our drill press review includes a model that should work for just about any needs, from carpenters and other woodworkers to automotive mechanics and everyone in between. Know your needs, assess your installation area, and then choose the model that suits you best.

Top 9 Best Track Saws for 2019

best track saw

When it comes to woodworking projects, a great deal of cutting is involved. Much of that will be done on a table saw, but lugging full sheets to the cutting location, positioning them across the table, and then cutting them down multiple times is huge waste of energy and time. A track saw can save you a lot of that effort, allowing you to make rough cuts first, trim down larger pieces of wood, and then more easily and accurately use your table saw. Of course, finding the best track saw can be challenging – there are tons of different options on the market, all with their own list of features and benefits. We’ve taken the struggle out of the process for you, and compiled a list of the top track saws for home and professional users.

The Best Track Saw Reviews

 NamePower TypeMotor CapacityRPM RangeRail Length 
Makita SP6000J1Corded12 amps2,000 to 5,20055 inchesCheck on Amazon!
DeWalt DWS520KCorded12 amps1,750 to 4,000N/A – rails not includedCheck on Amazon!
Worx WX430L20V battery20 volt/1 AHNot listedN/A – rails not includedCheck on Amazon!
DeWalt DCS520T160 V battery60 volt/2 AHNot listedN/A – rails not includedCheck on Amazon!
SHOP FOX W1835Corded9 ampsMax 5,500N/A – rails not includedCheck on Amazon!
Bosch Tools Track Saw GKT13-225LCordedNot listedNot listedN/A – rails not includedCheck on Amazon!
Festool 575387CordedNot listedNot listedN/A – rails not includedCheck on Amazon!
DeWalt DWS520SKCorded12 ampsNot listed59 inchesCheck on Amazon!
Makita XPS02ZU18 V battery18 V/5 AH2,500 to 6,300N/A – rails not includedCheck on Amazon!

Now that we’ve looked at a head-to-head comparison chart, we’ll dive into in-depth reviews on each track saw model we’ve listed. The goal is to help ensure that you can make an informed, accurate decision regarding your purchase.

Makita SP6000J1

The top track saw on our list is the Makita SP6000J1. It offers powerful performance, durability, and unlike most other models on our list, this Makita track saw actually comes with the rail. The saw weighs in at just 16.5 pounds, meaning that it’s lightweight enough for easy portability, but hefty enough for good control. It also comes with two blades – a 6.5-inch circular saw and a 6.5-inch 48T carbide-tipped saw blade. This track saw also comes with an interlocking carrying case, and the guide rail measures a full 55 inches in length. There’s also an included hex wrench to make changing blades simple and easy. The 12-amp motor also offers more than ample power for just about any cutting job you might have, making this a great option for home or professional use.

DeWalt DWS520K

The DeWalt DWS520K is an excellent track saw for a wide range of uses. Powerful and durable enough for carpenters and contracting professionals, it is also well suited for home use. It features 12 amps of power with a maximum of 4,000 RPM. It weighs less than the Makita that tops our list, coming in at 11.5 pounds. That ensures excellent portability and also eases arm strain during use. Note that this is the bare tool only and comes with no accessories at all. It does not include any saw blades, nor does it include a rail. It fits 6.5-inch blades, and has a maximum bevel capacity of 47 degrees. It’s important to mention in this DeWalt track saw review that the tool is only designed to work with a zero-clearance track system, and it also features dual anti-splinter edges for straight, worry-free cutting.

Worx WX430L

Worx is becoming a name to contend with in the power tools segment, and the WX430L is a worthwhile addition to our list. It uses standard 6.5-inch blades, and is light enough to alleviate muscle strain and ensure good portability. This is one of only a few battery-powered models to make our list, and the 20V system is designed so that you can share batteries across multiple Worx tools (battery capable, of course). The saw comes with one wood-cutting blade, and features a flush-mount blade design to increase visibility and accuracy. The bevel gauge helps you reach the perfect angle with every cut. The blade guard is also a nice addition. Note that this track saw does not come with a rail. The track saw kit includes a 6.5-inch wood-cutting blade, a single 20V battery, and a five-hour charger, plus the saw itself.

DeWalt DCS520T1

If you’re looking for a track saw kit, the DeWalt DCS520T1 may be the right option for your needs. It includes the track saw, a wood-cutting blade, a wrench to change the blade, a battery and a T-Stack kit box, and a charger. This is a battery-powered track saw, though, so it may not be right for all users. One of the most interesting features of this DeWalt track saw is the built-in anti-kickback mechanism and riving knife that help to reduce kickback and ensure ease of use. It also has a low-profile guide for 90% dust extraction and hand protection, and is designed for use with dual-edged tracks. Note that this saw does not come with a rail.

SHOP FOX W1835

The SHOP FOX W1835 brings plenty of power to bear for home and professional users, although the 9-amp motor is a little smaller than some of the other corded models on our list. The motor maxes out at 5,500 RPM, which is something of a middle ground in our track saw review. Like the DeWalt above, the SHOP FOX comes with an anti-kickback mechanism, as well as a dust elimination system that can connect to a shop vac. The blade guard is low-profile, and the saw only weighs 11 pounds for excellent portability and usability. Note that this saw is capable of both plunge and straight cutting. The SHOP FOX track saw does not come with a rail, and it is not compatible with tracks/rails made by other manufacturers. However, a rail/track is available from the manufacturer as an additional accessory.

Bosch Tools Track Saw GKT13-225L

Bosch has been a best-selling name in the power tool industry for a very long time, and the company’s entry to the track saw segment is worthy of the brand’s reputation. The Bosch Tools Track Saw GKT13-225L uses a standard 6.5-inch blade and can be used for both plunge and straight cutting. It offers a single bevel pivot point for ease of use and “constant electronics” to ensure that there is always plenty of power available to handle whatever you might throw at it. This track saw kit includes a 6.4-inch wood-cut blade (48 tooth), as well as a wrench for changing the blades, an L-BOXX case, and the saw itself. Note that this saw does not include the rail/track, and that it should only be used with Bosh tracks, as the saw is specifically designed for that track’s dimensions. It also has a dust port on the rear that can connect to a shop vac.

Festool 575387

This Festool track saw is a very worthy contender to our list. It offers the ability to achieve straight cuts each and every time, and never worry about splinters. The saw includes a spring-loaded riving knife so that the blade is not pinched and to reduce the chance of kickback. The unique Fastfix system ensures that you can quickly and easily change blades, as well. The rear vacuum/dust collection port offers easy connectivity for shop vacs, and the “micro-adjustable” depth indicator ensures that you’re always able to get just the right cut depth. This track saw also includes a replaceable splinter guard, and can accommodate multiple blade types. In addition to the saw, this purchase includes a flag window, a wrench, a vision panel, a splinter guard, and a fine-tooth saw blade. Note that the rail/track is not included with the saw.

DeWalt DWS520SK

Looking for a fast, efficient track saw that helps you achieve straight, accurate cuts all the time? This might be the ticket. The DeWalt DWS520SK delivers powerful performance and versatility, powered by a 12-amp motor that can handle wood up to 2-1/8th inch thick. The saw also features an anti-kickback mechanism for safety and better results, and the blade guard is low-profile for enhanced visibility. The DeWalt DWS520SK is one of only a couple of track saw kits in our list that actually comes with the track/rail. The track measures 59 inches, making it the longest option we review. Note that this saw is capable of plunge cuts as well as straight cuts, and the saw comes with a 3-year limited warranty, as well.

Makita XPS02ZU

The final entry to our track saw review is the Makita XPS02ZU. Like the previous Makita track saw review, this one is quite positive and the saw’s position at the bottom of this list still places it far above other options on the market. This is a battery-powered saw that uses 18-volt batteries (included), so it may not be the right choice for everyone. The brushless motor also offers better performance and longevity over time. With a fully-charged battery, the company states that you can get 125 cuts with 4×8, .5-inch plywood. The Bluetooth connectivity allows wireless on/off functionality, and the rear vacuum port helps ensure a clean, dust-free workspace. Note that this saw does not come with the track. It does come with a 6.5-inch wood and MDF/laminate blade, and a hex wrench.

As you can see from our track saw review comparison, there are plenty of powerful, highly-capable models on the market. However, if you’ve never owned a track saw before, or you’re not quite sure what to look for in a model, buying one can still be a bit confusing. To help shed some light on these topics and others, we’ve created a comprehensive buying guide, which will help ensure that you’re able to find the best track saw or track saw kit for your specific needs.

Track Saw Buying Guide

Not sure how to choose the right track saw? Not sure what a track saw even is? Whether you’re a first-time buyer or a professional replacing your trusted saw that’s on its way out, our buying guide has something to offer. We will explore a wide range of topics that impact your overall experience and will help ensure that you’re able to make an informed buying decision.

What Is a Track Saw?

First, let’s address perhaps the most basic question out there. What is a track saw? The answer is surprisingly simple it is a saw designed to be used with a track or rail to ensure the straightest possible cuts. It can be used to replace a table saw in some cases, or to make it easier to use a table saw for more precise cuts after trimming a piece of wood down before moving it to the table saw.

Is a Track Saw the Same Thing as a Circular Saw?

At first glance, you might think that there is very little difference between a track saw and a circular saw. It’s true that they do have a very similar appearance with what amounts to the same form factor. However, the functions are very different. The track saw is designed to be mounted to, you guessed it, a track. It also lacks the cumbersome blade guard found with circular saws.

There are quite a few other differences between a circular saw and a track saw, as well. For instance, with a circular saw, it is designed to be started at the end of a piece of material, turned on (blade spinning), and then moved forward into the area to be cut. That in itself is very limiting. There is also the fact that circular saws spread sawdust and debris, and that these saws often create splinters and result in a less than smooth cut surface.

With a track saw, the situation is different. These saws feature a very different construction than their similar-looking cousins. Unlike circular saws, the blade is not open. It remains tucked inside the body until you activate it. Then, it descends to the work area. This allows you to create “plunge” cuts rather than only end cuts, although a track saw can certainly be used to cut from the outside in. The saw also features technology that allows it to create smooth cuts free of splinters.

What Benefits Can a Track Saw Offer?

A track saw can offer quite a few benefits that make it a must-have option for your tool set, even if you already own a circular saw and a table saw. Some of the most important benefits to understand include the following:

  • Reduced splinters/smoother cuts.
  • Ability to work in tight spaces where a table saw cannot be set up.
  • Ability to create straight cuts without the need for clamps or a straightedge.
  • Dust collection capabilities (with specific models).
  • Make any kind of cut necessary at any location, from the edge of the material to the center.
  • Ability to cut many types of material, including wood, MDF, laminate, and more.
  • With the track, all you need to do is line it up and cut. That streamlines and simplifies your process.
  • No test cuts – the track shows you exactly where your blade will cut.
  • You get improved portability over table saws.
  • No re-cutting plywood – you get a final cut each and every time with no need to go back and re-cut.

What Is a Rail/Track?

The track, or rail as it is sometimes called, is one of the secrets to the track saw’s success. Simply put, it is a track that the saw rides in. Made of metal, each track is made to unique specifications and most are not usable with saws from another manufacturer. What that means is if you have a Makita track saw, you’ll need a Makita track. If you have a DeWalt track saw, then a rail made by Worx won’t do the trick.

Tracks, or rails if you prefer, are made with unique clearances designed specifically for the body of the saw in question. Most of them are zero-clearance affairs and they are usually made from aluminum for durability but also to reduce weight. Some have measurements marked along the edge of the rail, but most don’t.

Choosing the Right Track Saw Blade(s)

It’s important to note several things about track saw blades. First, they’re not the same size as the blade a circular saw uses. Most track saw blades are 6.5 inches, although some are larger, coming in at over 8 inches. You’ll want to make sure of the manufacturer specifications before buying replacement blades for your saw.

Most track saws come with a single blade, but some come with two. The default blade is a wood-working type that is relatively versatile. The second blade (if so equipped) is often finer, with more teeth. However, you will find that there are numerous types of blades on the market, as your track saw can be used to cut a wide range of materials. Some of the blade types on offer allow you to cut:

  • Plywood
  • Solid wood
  • Hardwood
  • MDF
  • Laminate
  • Tile
  • Stone

Note that while many track saws do use a 6.5-inch blade, that does not necessarily mean that all 6.5-inch blades are usable. Blade thickness also plays a role, and you’ll need to consult your owner’s manual to determine what is true for your specific saw.

Corded or Battery Powered Track Saws?

As with other power tools, batteries have come to play a role in the track saw segment. That means in addition to brand considerations, you also need to think about the power source that you want. Battery-powered and corded models both have their pros and cons, and neither is a clear winner over the other.

Corded

You’ll find more corded models on the market than battery-powered options. That means you are more likely to find the right mix of features and price for your specific needs. You’ll also find that corded models generally have more power and better performance, and there’s never a need to stop and swap a battery (or recharge if you only have a single batter). Finally, corded models are usually less expensive than their battery-powered counterparts. In terms of drawbacks, corded models really only have one – they’re tied to an outlet. That limits your ability to work in locations that don’t have access to the power grid.

Battery

Battery powered track saws are very convenient. They’re also highly portable. They can go anywhere you might need, even areas where there is no direct access to the power grid. However, they do tend to cost more than corded models, so you will need to spend more at the outset. There are also fewer options on the market, so your choices will be more limited. Of course, you always need to make sure that your batteries are charged and ready to go, and because most units only come with a single battery, you’ll usually need to purchase a spare for additional cutting performance. Battery-powered track saws are often somewhat less powerful than their corded brethren, but that is not always a deal breaker, and as battery technology improves, it becomes less and less of an issue.

What Features Matter Most When Buying a Track Saw?

Choosing a track saw means having an idea of what the various features mean and which ones matter most to you. To that end, we’ll run through some of the most important features to look for when considering a track saw, whether it is battery powered or corded.

RPM – RPM is often a measure of power, but in a way that differs from amps or watts. RPM, or revolutions per minute, is a measure of how many times the blade can turn within 60 seconds. The higher the number, the faster the blade can turn, and the harder and/or thicker the material it can cut (when combined with the right blade, of course). However, high RPM does not immediately equate to a more capable track saw. You also need to consider amps. Also, the more powerful a saw is, the higher the price tag will be.

Bevel Capacity – Bevel capacity is a term used to describe the angle range at which you can set the blade. With low-priced, budget track saws, you may have no bevel, or may be limited to 90 degrees. However, with higher priced models, you’ll find greater range. Some offer incremental adjustability down to fractions of a degree so you can always get the right angle for the project, whether you’re cutting plywood or MDF.

Cutting Capacity – Cutting capacity in this instance refers to the ability to cut through thicker or thinner materials and is a function of blade size. Most track saws use a 6.5-inch blade, but some can be equipped with larger blades. The larger the blade, the thicker the material you can cut through, or the thicker the stack of materials, such as two sheets of plywood. The saw form factor and body size also impact this capability, as well, though.

Variable Speed – Variable speed models allow you to adjust the speed of your blade to match the needs of the moment. In the simplest example, a trigger would allow you to adjust the speed of the blade based on finger pressure on the trigger. More pressure would increase the blade speed, while less pressure would decrease the speed. Note that many track saws offer variable speed control, but this is not true across the board, so if you value the ability to control blade speed, make sure this feature is available on the model you purchase.

Anti-Kickback – Power saws have the potential to kick back when in use. This is a safety issue, and it can also cause damage to the material being cut. Higher-quality track saws use what’s called a riving knife that rides just behind the main cutting blade to reduce kickback potential, prevent the material from pinching the blade, and increase both your safety and the quality of the cuts you make.

Blade Guard – Like circular saws, track saws have a blade guard. However, make sure that your saw is equipped with a low-profile blade guard so that in addition to protecting you, it also helps improve visibility in front of the saw.

Dust Collection System – Most track saws on the market today have a dust collection system, but this is not true for all models that you will find. A good dust collection system allows you to connect a shop vac to the back of the track saw and automatically vacuum up sawdust and debris while in use.

Conclusion

In the end, there is a track saw out there for every budget and every need. Whether you’re a professional or a home user, you’ll find a tracksaw that fits your needs, your budget, and your feature requirements. From DeWalt to Worx, Makita to SHOP FOX, finding a high-quality cutting solution has never been simpler.

Miter Saw Vs Circular Saw: Making the Best Choice Between the Two Power Tools

miter saw vs circular saw

Miter saws and circular saws are both two of the most used power tools out there and while some people have a need for both, that isn’t the case for everyone. Each of these tools has its own advantages and specific uses, but that doesn’t mean that both are needed in a woodworking shop or garage. Today, we will be looking at the differences between miter saws and circular saws. We’ll look at situations where one is preferable over the other and what each is best used for.

What to Know About the Miter Saw

A miter saw is a type of specialized power saw that is excellent for use cutting all sorts of different angles. It usually features a 10- or 12-inch blade that is mounted on a swing arm. The arm can swivel to the left or the right to make precise angled cuts. Having a miter saw in the workshop is handy and they can be used to make cuts for door frames, window casings, picture frames, crown molding, and more. It is not as versatile as the circular saw, but it still offers the option to make many different cuts.

If what you want is a powerful saw that is capable of making accurate crosscuts, you really can’t beat what a miter saw brings to the table. It’s highly accurate, which is why it’s popular when cutting moldings, trims, and tight-fitting joints. When a perfect fit is mandatory, you can’t beat the miter saw for that purpose.

A miter saw can be used to make straight cuts across the grain of wood, or you can make a miter cut, which is one angled across the width of the board you are working with. Miter saws are also capable of offering compound cuts and bevel cuts. While the miter saw is most often used to cut small and medium sized board, the chop saw, which is similar to a miter saw, can also cut through metal.

compound miter saw for woodworking

The Advantages of Choosing a Miter Saw

One of the advantages of choosing a miter saw is that it can make precise cuts whether you want to make miters, bevels, or cross cuts. The saw is exceptional at offering precise cuts and that’s one of the main reasons people choose to use it. It also has the advantage of not needing guides. The angle of the saw itself can be adjusted so every cut comes out perfectly.

Something else that a miter saw is excellent at is cutting tight-fitting joints. If you often need to cut baseboard, crown molding, or trim for windows or doors, this is the best option for that purpose. While you can do this on other power tools, you can’t ensure the same perfect fit that you get with a high-quality miter saw.

Miter saws also save a lot of time in some situations. These saws are designed to make wider cuts, which means you can save a large amount of time when doing projects that involve cutting large boards. Those who choose a compound miter saw, which is a common option, also have the advantage of an automatic blade that cuts through materials quickly and easily.

The circular saw is without a doubt more versatile than the miter saw, but the miter saw wins out when it comes to reliable cross cuts, compound cuts, and bevel cuts. Almost any miter saw can handle these sorts of cuts quickly and easily to save you time and effort.

Disadvantages of Choosing the Miter Saw

As with anything, where there are advantages there are also disadvantages. This is the case with the miter saw, just as much as it is with the circular saw. One of the biggest disadvantages of choosing a miter saw is that it is not nearly as versatile as a circular saw. The person doing the work is required to move the material to the saw, which is stationary. This leads to a limit when it comes to the number of cuts you are able to make.

Another thing that might be a con for those considering a miter saw is that they tend to be more expensive. When you compare them to a circular saw, you might spend double or more on the miter saw than you would on a decent circular saw. You can get a basic circular saw for around $50 while it’s closer to $200 for a quality miter saw.

Miter saws are also stationary power tools, as we mentioned before, which means you need a decent amount of space in your workshop or garage to house them. If you have a smaller space, the miter saw might not be the best option since it will take up space that could be used for something else.

Everything You Need to Know About the Circular Saw

One of the most versatile saws to have in your workshop is the circular saw. Pretty much any cut you want to make, a circular saw can handle for you. While it does have some shortcomings, it is one of the best power tools to have available in your workshop. The reason the saw is called a circular saw is because of the toothed circular blade which rotates at extreme speeds to offer long straight cuts that go with the grain of wood. However, that’s not all a circular saw offers. It can also make cross cuts or cuts against the grain as well.

While the circular saw does a great job of cutting smaller boards, most people use it largely for cutting large sheets of plywood. This gives the saw an advantage over saws like the miter saw which cannot easily cut plywood. Since plywood is used in all sorts of projects, a circular saw really excels here.

There are all sorts of projects that need a circular saw but the most common include making racks and cabinets. However, this saw is also ideal for everything from roofing to masonry work and even some types of plumbing. Some of the cuts you can get from a circular saw include rough bevel rips and right-angle bevel cuts.

Positive Aspects of the Circular Saw

The circular saw is the most versatile power saw you can have in your workshop. These saws can make all sorts of cuts and also can cut through many types of materials including sheets, metal, and pipes. The only thing that you need to do is ensure you have the right blade on the saw for each project and material you work with.

When you need to make lots of straight cuts, the circular saw is also the best option. This is important since most woodworking projects have the need for straight cuts. There are few power saws that can make these cuts in the same way as a circular saw, and even fewer that can handle long cuts that go against the grain of the wood.

A circular saw is capable of handling most of the same cuts that a miter saw does, and it is much less expensive. This is a huge perk for anyone who has a smaller budget or wants to get as much bang for their buck as is possible. Buying a circular saw before a miter saw is typically the choice for most woodworkers out there.

Disadvantages of Choosing a Circular Saw

One of the issues with a circular saw is that it can make rough edge cuts. Splintery edges and tear-outs for not uncommon. The reason for this lies in the toothed blade used with the saw. If you choose a fine-tooth blade, this can offer you cuts that are smoother than you would otherwise get with a larger-toothed blade.

Another problem with the circular saw is seen when you need to make angled cuts or curves. While a circular saw is capable of cutting angles, there is a lot more work involved than with the miter saw. You need to set up a jig, measure the angle, and hope that it comes out correctly. Some curved cuts are especially difficult for the circular saw just based on its design.

Choosing the Right Saw for Your Needs

When you’re considering whether to purchase a miter saw or a circular saw, the first thing you want to think about is what capabilities you will need most often. The two saws have some distinct differences and knowing what you will be using it for can immediately push you in the direction of one over the other.

Most people who need to choose one over the other end up going with the circular saw. That’s because it is versatile and capable of cutting many types of materials. It can do most things the miter saw can do and it can do so for a lower price. However, the miter saw is often a less intimidating option and may be the ideal choice if most of your work involves making miter cuts for molding and cabinets.

Top 12 Best Random Orbital Sanders for 2019

best random orbital sander

The Best Random Orbital Sanders to Have on Hand in the Workshop

If you are sick of putting in a ton of work with your hands and a bit of sandpaper to clean up projects, what you might need is a random orbital sander. While the manual method works just fine, it can take a long time and be overwhelming on large projects. A random orbital sander is capable of moving a disc of sandpaper in a circular motion. The pattern it uses is random to prevent leaving swirls and patterns in the end product.

In most cases, a random orbital sander is used for do-it-yourself projects in the home. It can work for sanding out boards, chairs, tables, doors, and much more. These power tools can also be used to smooth walls or slabs of wood to create a beautiful finish. Orbital sanders are the most popular type of sanders by a landslide for many of these reasons. The majority of these sanders are handheld and referred to as palm sanders.

A random orbital sander is easy to use. You attach a disk of sandpaper to the device, power it up, and you are good to go. However, what is harder is deciding on which sander is the right one for you. That’s why we wanted to offer some insight on the best 12 random orbital sanders on the market today. We’ll also share some expertise on choosing the sander that works best for your needs.

 NameOrbits Per MinuteItem Weight 
Bosch Power Tools Random Orbit Sander ROS20VSC7,500 – 12,0003.5 PoundsCheck on Amazon!
Black + Decker BDERO100 Random Orbit Sander12,0003.0 PoundsCheck on Amazon!
DeWalt DWE6421K Random Orbit Sander Kit12,0004.0 PoundsCheck on Amazon!
Makita BO5041K Random Orbit Sander Kit4,000 – 12,0003.1 PoundsCheck on Amazon!
Porter-Cable 382 Random Orbit Sander12,0003.6 PoundsCheck on Amazon!
Bosch Power Tools 1250DEVS Electric Orbital3,100 – 6,5007.4 PoundsCheck on Amazon!
DeWalt DCW210B 20V Max Brushless Orbital Sander8,000 – 12,0001.9 PoundsCheck on Amazon!
3M Random Orbital Sander 2031712,0002.4 PoundsCheck on Amazon!
Porter-Cable 7346SP Random Orbit Sander2,500 – 6,8006.0 PoundsCheck on Amazon!
Festool 574993 Random Orbital Sander ETS 125 REQ-Plus12,0003.6 PoundsCheck on Amazon!
Gedu Professional Air Random Orbital Palm Sander12,0002.4 PoundsCheck on Amazon!
Milwaukee Electric Tools 2648-20 M18 Random Orbit Sander7,000 – 12,0002.7 PoundsCheck on Amazon!

Bosch Power Tools Random Orbit Sander ROS20VSC

When looking at orbital sander reviews, one of the manufacturers you are going to see a lot is Bosch. The ROS20VSC is a compact Bosch orbital sander that is perfect for beginners. It comes with a dust canister, sanding pad, dampening ring, sanding disc, vacuum hose adapter, and a carrying case.

The orbit sander is five inches and created with a versatile 2.5-amp motor to be powerful and quick to use. Users can adjust how slow or fast the sander works depending on the project at hand through various speed level controls.

As with most other contenders for best random orbital sander, it uses a hook and loop system for connecting the sanding disc. It also has a pad dampening system to ensure a smooth surface after the sanding is done. It is a corded model and dust collection is part of the system, which prevents making an unneeded mess during use.

Pros:

  • Ergonomic soft-grip top for comfortable grip positions
  • Constant response circuitry for maintained control and speed
  • Included dust canister with dust level indicator

Cons:

  • Challenging to control at high speeds

Black + Decker BDERO100 Random Orbit Sander

The BDERO100 by Black + Decker is another strong contender for the best orbital sander on the market today. It’s fairly inexpensive and has the performance of a sander that costs more. It is a small and compact orbital sander, which makes it simple to use. Being so small, it’s easy to control your pressure against a material when using it.

This sander is a cordless model, which is somewhat uncommon among the more powerful sanders out there. It uses the efficient hook and loop system for quick changing of sandpaper on the fly. It’s a well-known and much used tool because of the high performance and low price.

Those who want to keep a neat workspace will appreciate that the tool includes a dust canister as well as a power switch that is sealed against dust. It comes with a 150-grain sanding pad for users to get started with your new Black and Decker orbital sander.

Pros:

  • Compact and lightweight for control and ease of use
  • Efficient and quick rate of material removal
  • Easy sandpaper changes through hook and loops system

Cons:

  • Lacks a variable speed dial

DeWalt DWE6421K Random Orbit Sander Kit

The BDERO100 by Black + Decker is another strong contender for the best orbital sander on the market today. It’s fairly inexpensive and has the performance of a sander that costs more. It is a small and compact orbital sander, which makes it simple to use. Being so small, it’s easy to control your pressure against a material when using it.

This sander is a cordless model, which is somewhat uncommon among the more powerful sanders out there. It uses the efficient hook and loop system for quick changing of sandpaper on the fly. It’s a well-known and much used tool because of the high performance and low price.

Those who want to keep a neat workspace will appreciate that the tool includes a dust canister as well as a power switch that is sealed against dust. It comes with a 150-grain sanding pad for users to get started with your new Black and Decker orbital sander.

Pros:

  • Compact and lightweight for control and ease of use
  • Efficient and quick rate of material removal
  • Easy sandpaper changes through hook and loops system

Cons:

  • Lacks a variable speed dial

Makita BO5041K Random Orbit Sander Kit

This Makita orbital sander is an excellent choice for DIY restoration projects, furniture restoration, cabinet making, deck installation, and other carpentry needs. It offers speed, power, and performance with a nice amount of control and grip. It also offers plenty of user-friendly features.

This orbital sander has plenty of power and boasts a 3-amp motor with sealed ball bearing construction for long life. It does have a variable speed dial with settings from between 4,000 and 12,000 OPM so users can make changes based on their current projects.

The palm grip is rubber and ergonomic and the front handle has a pistol grip for control when sanding areas that are difficult to reach. It also has a lock-on button so you can work with comfort. The sander utilizes a hook and loop system to switch out sandpaper on the fly.

Pros:

  • Fast and efficient smooth sanding abilities
  • Features large two finger trigger switch
  • Pad brake designed for reduced gouging and high performance

Cons:

  • Comes with a single sandpaper disc

Porter-Cable 382 Random Orbit Sander

One of the top Porter Cable random orbit sanders is the 382. It has controllable pad speeds to start smoothly and prevent gouging a project. It incorporates a sealed ball bearing construction for durability and stability on any job.

There aren’t a ton of extra features but what the sander does, it does well and it comes at a reasonable price point. It fits the hand well and is easy to control and use. It will provide a nice finish on many woodworking projects at home or on a professional basis.

This is a reliable orbit sander that is made for home use. If you are a beginner or want a basic model, this is a fantastic choice. However, it may not have the needed power for a professional.

Pros:

  • High-quality dust collection system
  • Ergonomically designed for maximum comfort
  • Counterbalanced for low vibration setting

Cons:

  • Can become quite hot over time

Bosch Power Tools 1250DEVS Electric Orbital Sander

Those looking for the best sander on the market will be hard pressed to find something better than the 1250DEVS. It has a super powerful 6.5-amp motor which is fantastic for jobs both large and small. The sander has a soft-start system which means it starts up slowly rather than going full speed from the start.

This orbital sander comes in a package with a six-inch backing pad, dust tube, auxiliary handle, sanding disc, pad wrench, and dampening ring. This is everything needed for sanding jobs, wood floors, and finishing furniture.

It comes with a dust collection system to prevent mess. It also has a pad dampening system to prevent swirls on the projects you are doing. It also comes with a one-year warranty.

Pros:

  • Includes stability handle for versatility
  • Features large sanding area for projects
  • Powerful and well-built sander

Cons:

  • Handle may be challenging to attach

DeWalt DCW210B 20V Max Brushless Orbital Sander

This DeWalt circular sander is under two pounds as a bare tool and has a brushless motor for efficiency and great runtime. The sander is a cordless that runs on the 20V battery line from DeWalt. It also has a dust sealed power switch.

The sanding surface is five inches and has a hook and look replacement pad to easily swap out pads. The variable speed orbital sander has seven different speed options and can range in space from 8,000 to 12,000 OPM.

This is a pricier option than some others on the list but it’s also a hefty machine that will last. It stands out as a quality power tool that would be an essential in any workshop.

Pros:

  • Variable speed option for various applications
  • Brushless motor for a long running time
  • Quality cordless model sander

Cons:

  • Charger and battery are sold separately

3M Random Orbital Sander 20317

This 3M random orbital sander is made for professional use and its features really show that. The motor is powerful, and the sander uses a 3/16” orbit with a five-inch diameter to work well with abrasives. It can be used with various 3M abrasives and accessories to make it versatile for heavy-duty work.

The sander has an ergonomic design for utmost comfort through a rubber grip and wrist support. The alloy steel level allows users easy control but is recessed to diminish pressure points while in use.

There is a speed dial which can easily be used by your thumb. The cover is durable and lessens vibration to avoid stress on the hand or the tool itself. It also has a muffler built into it to cut down on the noise you hear when sanding your latest project.

Pros:

  • Aluminum body for high durability and lifespan
  • Smooth performance and lessened vibrations
  • Operation is quieter than competitors

Cons:

  • Best used for professional applications

Porter-Cable 7346SP Random Orbit Sander

The Porter Cable 7346SP is a versatile tool that works well for furniture restoration, automotive repairs, and more. It’s a six-inch sander with a large 4.5-amp motor with overload protection. It features a variable speed dial and ranges between 2,500 and 6,800 OPM to customize with your project.

This orbit sander is lightweight with a counterbalanced design. It also has a removable handle which can be set up to be used with the left or right hand. It is highly durable with a ball and roller bearing construction for smooth work under any workload.

One of the best parts of the sander is the long 10-foot power cord which provides freedom of movement in the workshop. It comes with a wrench and has a three-year warranty as well as a year of free service.

Pros:

  • Features a removable dual position handle
  • Long 10-foot power cord for freedom of movement
  • Compact and lightweight design ideal for long projects

Cons:

  • May not be ideal for professional level work

Festool 574993 Random Orbital Sander ETS 125 REQ-Plus

This Festool random orbital sander has a design that is created to be comfortable for people regardless of hand size. It’s compact and lightweight so it can be used for long periods of time even vertically and overhead. It’s one of the best choices for a professional who wants power and performance.

Small adjustments are simple to make with the stepless variable speed options. This is a corded sander with a balanced vibration stop for the highest quality results and smooth operation. It comes with a three-year warranty and all-inclusive service if something does go wrong with the device.

While it doesn’t come with a dust collection hose, it does have a Jetstream design and a robust dust collection system. This is one of the best orbital sanders for those who have a need for handling professional work, but it might be overkill for a beginning hobbyist.

Pros:

  • Professional level quality with high performance and power
  • Efficient Jetstream design for dust collection
  • Balanced vibration stop design for smooth operation

Cons:

  • Does not come with a dust collection hose

Gedu Professional Air Random Orbital Palm Sander

Those who want a basic random orbital sander will find that the Gedu hits the mark. It is lightweight and made of composite plastic. For overhead surfaces, this is a sander that can handle the job without wearing you out. It features a five-inch disk and is powered by air. The wrist and hand support make it easy to use and comfortable over long projects.

There’s very little vibration with this machine yet it manages a finished touch to your woodworking. For the best results, lubricating oil is included that can add a lot of performance when used. It has a built-in regulator that rotates up to 12,000 OPM for speed control. Adjustments can be made to create the perfect output on your work.

Since this is an air-powered model, worries about sound are negated compared to electric orbital sanders. This also makes it easier to control than other orbital sanders on the market. It can be a little difficult to learn how to fit the sanding discs but after you have it down, this is a high-quality air-powered sander.

Pros:

  • Variable speed controls for use in various applications
  • Nearly silent operation during use
  • Capable of operation on walls and ceilings

Cons:

  • Build quality could be higher

Milwaukee Electric Tools 2648-20 M18 Random Orbit Sander

This wood orbital sander comes with a universal hose adapter, extension for 9-volt batteries, and a plastic dust box with included filter. It is fairly lightweight at just over four pounds, but not as small as some of the other random orbit sanders on the list. That includes the weight of the dust box and battery though, so it’s not a deal-breaker.

The sander from Milwaukee Tools has great vibration control so your hand won’t get tired or numb while using it. This sander has a vertical design, which is common for this type of sander and works well for projects of all sizes. It features a five-inch sanding pad, which is also fairly normal for an orbital sander.

Removing material and doing finish sanding is no problem for this tool. It has a comfortably placed on and off switch and variable speed controls to switch up depending on the project you are working on. The included dust box works well but the hose attachment is even better.

Pros:

  • Quick change of sanding pad with hook and loop system
  • Speed dial allows control over output of sander
  • Powerful but easy to use power tool

Cons:

  • Some find tool awkward to use due to design

Choosing the Perfect Random Orbital Sander

The first thing to know is that many people confuse a random orbital sander with a traditional orbital sander since the names are fairly similar. The difference lies in these tools having different shapes and removing material in different ways. With a random orbital tool, the sander has a round base which spins and vibrates for efficient sanding.

Some of these sanders also offer variable speed controls. This means that you can get a large variety of results from the machine. These sanders can do everything from preparing a surface for a finish to smoothing over a rough slab of wood.

Most random orbital sanders have pads that are five or six-inches in size. If the pad is smaller than that, the tool is mainly intended for detail work. On the other hand, something over six-inches is usually a pneumatic sander which will require the use of an air compressor.

There are several things to look at when choosing an orbital sander, which we’ll share below.

Type of Power Source

There are three types of power sources for an orbital sander: battery operated, pneumatic, and corded. The power source of the choice you make will determine how heavy it is and how much power the motor is capable of. Battery operated models tend to be heavier and less powerful because of the battery itself.

While most people prefer a corded model, battery technology is constantly improving so many will find a battery powered orbital sander just as good. Pneumatic models are extra powerful but are mostly used for professional work.

Understanding Motor Speed and Power

Most of the sanders you will see have somewhere between two and five-amps of power. This refers to the input power, while the output power is the more important thing to know for the end user. One model might have a large input power but have the same output as another model with a smaller amp motor.

The pad vibrations can range from around 4,000 to 14,000 OPM or orbits per minute. The larger the number, the more quickly the tool can vibrate and sand a surface.

random orbital sanders

Choices of Base Plates

While sanding, you want to ensure you get a great, flat finish on the surface. The base plate is the part of the random orbital sander where the sandpaper is attached. In most cases, this is going to be done with a hook and loop system, although some use stick-on sandpaper. The majority of the models you will see have holes on the base to help remove sawdust, which ensures your surface doesn’t get scratched. It’s a good idea to go with a high-quality baseplate or you will end up needing to replace it or be required to purchase a new sander.

Choosing the Right Sander

With nearly any woodworking project, you will need to do some sanding. A good sander is something that should be in the workshop for that reason. While there are many types of sanders to choose from, the orbital sander stands out due to ease of use, efficiency, and versatility. Nearly every well-known manufacturer of power tools offers a random orbital sander, so finding an excellent one isn’t very hard.

Remember the tips we gave you and consider the sanders on our list for the best result. You’re now armed with everything you need to make a choice that fits your needs.

Top 11 Best Paint Sprayers for 2019

best paint sprayer

Make Painting Around the Home a Breeze with These 11 Paint Sprayers

Most people who need to paint a wall or a few pieces of furniture will immediately begin thinking about the brushes and rollers they need to get the job done. However, there are some situations where this can be time-consuming, such as painting cabinets, a fence, or an entire home. When you have a need to paint a large area or do a lot of painting, getting things done quickly is more easily done when you use an airless paint sprayer.

These tools are also extremely helpful when you need to do work painting small details or corners, especially if it involves intricate furniture. Rollers and brushes may be unable to handle the job well and lay the paint evenly. With a paint sprayer, these big and small jobs can be done efficiently and quickly so you can move on to other tasks. It also gives you the ability to handle painting needs on your own without bringing in a professional with a paint gun.

If you are thinking about purchasing a paint sprayer, we’re here to help. We’ve rounded up 11 sprayers, and the best paint sprayer for you may well be listed here. We’ll give you all the details about these sprayers and then provide extra information about what you should be looking at when you choose the one to take home with you.

Best Paint Sprayer Reviews

 NameMax Operating PressureHose Length 
Graco Magnum 262800 X5 Stand Airless Paint Sprayer3,000 PSI75 FeetCheck on Amazon!
HomeRight Finish Max C800766 Paint Sprayer3,000 PSIN/ACheck on Amazon!
Wagner Spraytech 0518080 Control Spray Max Corded2,500 PSI20 FeetCheck on Amazon!
Rexbeti Ultimate 750 Paint Sprayer2,000 PSI20 FeetCheck on Amazon!
HomeRight C800971.A Super Finish Max Extra Power Painter3,000 PSIN/ACheck on Amazon!
Graco Magnum 262805 X7 Cart Airless Paint Sprayer3,000 PSI100 FeetCheck on Amazon!
Wagner 0518050 Control Spray Double Duty Paint Sprayer2,700 PSIN/ACheck on Amazon!
HomeRight Power Flo Pro 2800 C800879 Airless Paint Sprayer Spray Gun2,800 PSI25 FeetCheck on Amazon!
Graco 16Y385 TrueCoat 360 Paint Sprayer1,500 PSIN/ACheck on Amazon!
Tomic Himalaya Airless Paint Sprayer3,000 PSI25 FeetCheck on Amazon!
Titan Tool 0580005 High Efficiency Airless Paint Sprayer Titan Controlmax1,500 PSI25 FeetCheck on Amazon!

Graco Magnum 262800 X5 Stand Airless Paint Sprayer

Graco is a top brand in the paint sprayers world and this product easily shows why that is the case. It works well for wood and wall painting courtesy of a built-in feature for priming. This is a well-designed paint sprayer that is durable and simple to use.

No matter what sort of paint you need to use for coating materials, it’s likely the Graco Magnum 262800 X5 can handle it. Latex-based paint is no problem for this airless sprayer, nor is heavy acrylic.

This sprayer is light but sturdy with a handle so you can use it with a single hand. It also offers top control with a pressure sensitive tripper. The Magnum is outfitted with a ½ horsepower motor and can offer a pressure point of up to 3,000 PSI. Add a few gallons of paint and you are ready to go.

Pros:

  • Designed to be simple to clean and maintain
  • Heavy-duty stand is stable and won’t move while painting
  • Features adjustable pressure control for versatility
  • Long hose for a better reach when painting

Cons:

  • Better for outdoor work than indoor work
  • Thick material may cause sprayer to clog

HomeRight Finish Max C800766 Paint Sprayer

Those who are looking for a sprayer that can handle most home jobs without the price tag of a professional electric paint sprayer will likely appreciate the HomeRight Finish Max C800766. This is a budget level sprayer that can handle most non-professional projects around the home. It’s also efficient and very easy to use.

Rather than having a motor and compressor, this is a small device that fits in the hand. Once you screw on the container to hold paint, the entire spray painter will fit in a single hand. The nozzle can be adjusted to three different positions and makes switching between vertical and horizontal painting simple to do in no time.

The trigger allows you to control your spray level to ensure flawless layers of paint. While the sprayer might seem small, it is quite powerful and can handle paints ranging from latex to cabinet, chalk, and stains. It is also easy to clean by unscrewing the container and rinsing it under running water.

Pros:

  • Features an adjustable paint flow for diverse projects
  • Affordable and won’t break the budget
  • Simple to use and maintain even for beginners

Cons:

  • May clog with thicker materials and paints

Wagner Spraytech 0518080 Control Spray Max Corded

Airless paint sprayers are a great thing to have around the home when painting is needed and this Wagner airless paint sprayer may be the best you can get in 2019. This is a low-pressure, high-volume sprayer which works great for home use since it’s light and small. It also has a light sprayer so you can reach areas you couldn’t with other tools.

This gun has a cup underneath that stores the paint and there is a dial with ten levels for you to adjust the amount of paint you want to spray at one time. It also has a 20-foot-long hose so you can walk around and use the portion of the sprayer in your hand without worry.

The spray painter will work well in the home and has a two-stage turbine that can handle any paint or stain you could imagine. Great for the DIY user, this is an inexpensive and useful air paint sprayer.

Pros:

  • Lightweight and easy to use
  • Features various pattern choices to use
  • Does not create a large amount of overspray

Cons:

  • Power cord may be shorter than desired
  • Slow to use on large surfaces

Rexbeti Ultimate 750 Paint Sprayer

If you’re looking for an electric spray gun with a decent sized motor, the Rexbeti Ultimate 750 offers 500 watts of power. This gives you plenty of strength to drive thick layers of paint on ceilings and walls. It also has three nozzle size options and three spray patterns for versatility.

This spray gun works well for cleaning and maintenance and comes with attachments for that type of work in the box. Using a simple garden hose is enough. This also features a six-foot power cord, which is longer than many other options we looked at. You can move around and do what you need to do without having to unplug the gun and plug it in elsewhere to finish your work.

The Rexbeti is a fantastic option for a beginner as it offers plenty of features and is beyond simple to use. With the long reach, multiple settings, and long cord, you can get started on all those projects you’ve been putting off.

Pros:

  • Easy-to-use handheld sprayer for home projects
  • Designed to offer adjustable flow control
  • Strong motor to handle any large or small jobs

Cons:

  • Some users find the paint cup is too small

HomeRight C800971.A Super Finish Max Extra Power Painter

The HomeRight C800971.A Super Finish is an upgraded version of a previous spray painter from the same company. This product comes at a low price and offers plenty of value for your money through all the features it brings into your home. You can choose from circular, horizontal, and vertical spraying options depending on your needs.

This is a simple and easy-to-use air paint sprayer with adjustable controls. It’s lightweight and can be used anywhere without causing excess fatigue. This sprayer supports a large number of different materials when spraying and has adjustable controls. It also comes with a two-year warranty, so you know it’s going to be high-quality.

While maintenance and cleaning are required, it’s a breeze to handle both after you finish painting. It comes with instructions to help out a newcomer to spray painters and a measuring stick to help ensure your formula is perfect for use.

Pros:

  • Packaged with various tips to use on different projects
  • Capable of spraying several paints including oil-based options
  • Large container capacity to hold your paint

Cons:

  • Some thicker paints may need to be thinned before use

Graco Magnum 262805 X7 Cart Airless Paint Sprayer

The Graco Magnum 262805 X7 is a sprayer designed for outdoor projects from painting sheds to fences and siding. It offers an adjustable pressure gauge which can be turned down so the power paint sprayer can also be used indoors on walls, furniture, and more.

As an airless sprayer, the unit creates a large amount of pressure and can go up to 3,000 PSI. It also offers a flex hose to draw paint from a one- or five-gallon bucket without having to worry about filling up a container. The bucket rests on the stand so everything can be moved at the same time.

It’s also easy to clean the Magnum since it has a PowerFlush adapter. That means you can connect your garden hose to the machine to clean it in seconds. This is a huge perk when you need to switch between colors and materials as you don’t have to worry about material being left in the line.

Pros:

  • Comes with an informative manual and DVD
  • Device is made of metal for high durability
  • 3,000 PSI motor can handle any paint job

Cons:

  • May be heavy to move from location to location

Wagner 0518050 Control Spray Double Duty Paint Sprayer

Those who are planning to paint doors inside the home should look toward a latex paint sprayer that is simple to use. When painting a large area, you want to keep the complications to a minimum, which is just what you get with the Wagner 0518050. This machine is great for beginners who want to use a paint sprayer to change the color of a room’s walls.

This device comes with plenty of parts to make things easy and all can be detached easily for cleaning. The air paint sprayer is a reasonable size and works well for indoor applications. Even beginners should have no issue with assembling and disassembling the product.

If you’re looking to paint the entire inside of a house, a roller or brush might mean spending weeks on the project. However, with a paint sprayer like this one you can get through it in only a few days. It’s also easy to move around from room to room.

Pros:

  • Comes with two paint cups for the best in versatility
  • Features adjustable spray patterns for different projects
  • Lightweight and compact for simple use

Cons:

  • Gun may be heavier than some prefer

HomeRight Power Flo Pro 2800 C800879 Airless Paint Sprayer Spray Gun

As a homeowner or DIYer, the HomeRight Power Flo Pro is a fantastic airless paint sprayer option. It has a motor of ½ horsepower and a pump that can reach up to 2,800 PSI so both thinned and unthinned paint can be used easily. There’s no need to fill up a container to use it as it comes with a tube that goes into your paint bucket so you can start spraying as soon as you want.

A large number of paints can be used with this unit from oil-based paints to stains and thick latex emulsion materials. The adjustable pressure allows you to customize the flow of paint using a simple pressure dial. This can also help prevent overspray when using the gun.

The stain sprayer is easy to assemble and comes with a manual and instructions in case you get stuck. The spray gun features a reversible tip which is great for clearing out any clogs that happen while painting.

Pros:

  • Draws paint from can directly using flex hose
  • Created from stainless-steel for durability
  • Fully adjustable pressure for versatility of tasks

Cons:

  • Thicker paint may cause clogs to the tip

Graco 16Y385 TrueCoat 360 Paint Sprayer

One of the best parts of the Graco 16Y385 TrueCoat 360 is that it uses the FlexLiner paint bag system. Rather than using pipes or tubes, it uses an innovative vacuum system. It works great for projects like windows, furniture, and garage doors. It can handle both thin and thicker paints, but it may take more effort to work with materials like latex.

There is an easy-to-use control knob on the sprayer that lets you choose how much paint flow you want. It offers both 4-inch and 12-inch spray patterns for wide and narrow patterns depending on your project. It also features a reversible tip so you can avoid issues with paint clogging the hose.

There’s no need to have experience to use the TrueCoat 360. It has a straightforward user manual that includes photos. It also lists the supported materials so you can avoid using a paint or coating that isn’t appropriate for the paint sprayer.

Pros:

  • Affordable yet provides a professional paint application
  • Quality materials used to create a durable paint sprayer
  • Features FlexLiner bag technology

Cons:

  • May be too noisy for some users

Tomic Himalaya Airless Paint Sprayer

The Tomic Himalaya is an airless paint sprayer designed for use by homeowners as well as professional contractors. It is designed to work with paints that are water-based and oil-based for both interior and exterior painting. The paint sprayer draws paint straight from the bucket, so you avoid potential spills and messes filling up a container. It’s easy to cover large surfaces with the 3,000 PSI of pressure that the sprayer promises.

The hose on the sprayer is 25 feet long which is a reasonable length for most users. The hose is made to prevent kinking and the nozzle sizes are adjustable so you can select the one that fits your needs best. The paint sprayer also offers a handle so you can move it around the area where you are working without any trouble.

The Himalaya has decreased overspray, so you don’t need to worry about cleaning up excess paint that goes to areas you don’t want to paint. Whether you are looking to paint a shed, wall, fence, or a room, you’ll get a great finish in much less time than when using a roller and brush.

Pros:

  • Convertible nozzle sizes for all your work needs
  • Prevents messy spills by drawing from your paint bucket
  • Decreased overspray compared to other airless sprayers

Cons:

  • May be heavier than some other options

Titan Tool 0580005 High Efficiency Airless Paint Sprayer Titan Controlmax

The Titan Tool 0580005 Controlmax can give you the ability to paint just like a professional, even if you’ve never picked up a sprayer in the past. The tip of the airless paint sprayer incorporates technology that creates a softer spray which can reduce overspray by a substantial amount. It also offers a great finish with consistent control as you put on paint or other materials.

The Titan can handle both thinned and unthinned materials and has a repairable fluid section, so you aren’t left needing to buy a new sprayer if that part eventually wears out. It is a highly durable option that looks good and can get nearly any painting job done with ease.

This sprayer has a PSI of 1,500 which is lower than some but offers more than enough power for a home user. It also comes with a Sureflo Pusher Valve which allows you to prime each time you use it. It’s fantastic for small and medium sized projects around the home.

Pros:

  • Features high-efficiency airless technology
  • Long-lasting durable pump will handle many jobs
  • Requires no heavy equipment

Cons:

  • More difficult to clean than some paint sprayers

Choosing the Best Airless Paint Sprayer

As with any tool like this, the first thing you want to think about is what you will be using it for. Painting a single wall in your home doesn’t require the same power and efficiency as painting acres of fence, for instance. If you have a good idea of what you will be doing with the sprayer, there are a few things to think about while you choose the paint sprayer best for your needs.

Value of Product

Paint sprayers come in prices low and high with all sorts of different features. You have no lack of options between models, brands, and manufacturers. In some cases, choosing one of the cheapest models might be the right choice but that’s not always true.

A paint sprayer is something that you can use for years after you purchase it. That is why considering value is so crucial to selecting the right one. Spending a little more for a sprayer that offers better features and tools is often a smart plan. However, going all the way to the most expensive option may not be useful if you plan to do only home painting.

Horsepower and Pressure

When you look at reviews of paint sprayers, one of the things you are going to see mentioned a lot is the pressure and the horsepower of the tool. The higher the horsepower is, the more robust and stronger the motor is. That means paint will typically come out thicker and more quickly than with a sprayer with a lower horsepower.

However, in some cases, you may want a weaker and steadier stream, in which case a lower horsepower option might be the right choice. It again comes down to what your needs are.

Extra Features

Many of the best airless paint sprayers have features in common, but that doesn’t mean there are no differences. For instance, most have a cleaning system but not all have the same cleaning system. Features like being able to use a garden hose can make maintenance easier. Reversible tips are another feature that can be helpful to prevent clogging the tip.

Selecting the Best Paint Sprayer

At this point, you have what you need to choose the best paint sprayer for your projects or home. The 11 sprayers we have showcased will give you a good idea of what is out there so you can make the best choice for yourself. Follow our tips and look over our recommendations and you’ll easily choose the perfect tool for yourself.

Top 11 Best Circular Saws for 2019

best circular saw

Whether you are about to tackle your first DIY project, or you are looking to upgrade your essential toolbox, a circular saw is in your future. After all, with a hammer, power drill, and screwdriver set you can get most household and even professional tasks accomplished.

For instance, a circular saw is what you will need if doing some flooring, cutting sheetrock, building a doghouse, or attempting any number of creative projects. Because of this, a circular saw is a must-have item. Designed to cut straight lines with a circular saw blade that spins at amazing speed, you’ll find them in a number of different styles including sidewinder (inline), worm drive or hypoid. You’ll find them as cordless styles, too.

Easy to use, they are loaded with safety features and tools to help you get the best results. Below, we’ve listed 11 of the very best circular saws on the market. We’ll go over each of them, looking at pros and cons, and then share a few bits of important information on selecting the circular saw that is best for your specific needs.

Circular Saw Reviews

 NameStyleBlade Diameter 
DEWALT DCS391B Circular SawSidewinder6-1/2”Check on Amazon!
SKILSAW SPT77WML- Circular SawWorm Drive7-1/4″Check on Amazon!
Skil 5280-01 Circular SawSidewinder7-1/4″Check on Amazon!
DEWALT DWE575SB Circular SawSidewinder7-1/4″Check on Amazon!
Makita 5477NB Circular SawHypoid7-1/4″Check on Amazon!
Makita 5007F Circular SawSidewinder7-1/4″Check on Amazon!
TACKLIFE TCS115A Circular SawMini4-3/4″ & 4-1/2”Check on Amazon!
Makita HS0600 Circular SawSidewinder10-1/4″Check on Amazon!
PORTER-CABLE PCE310 Circular SawSidewinder7-1/4″Check on Amazon!
SKILSAW SOUTHPAW SPT67M8-01 Circular SawSidewinder7-1/4″Check on Amazon!
BLACK+DECKER BDCCS20B Circular SawSidewinder5-1/2”Check on Amazon!

DEWALT DCS391B Circular Saw

A mid-grade circular saw it is the great for moderate to small projects, this is a cordless saw offering up to 460 max watts out and up to 5150 rpm from the motor. It can cut with ease and features a magnesium shoe for accuracy and durability. It is part of the brand’s 20v MAX Lithium-ion lineup and allows multiple devices to use the powerful batteries.

The blade has a 0 to 50-degree bevel capability and uses a 6 ½” carbide tipped blade to allow for double times the usual material. This model rates high for its electronic brake that brings the blade to a halt almost immediately after the trigger is released.

The design of this circular saw is also ergonomic with rubber comfort grips and a battery position that keeps things balanced and lighter in weight (7 pounds). Comfortable handles ensure little fatigue.

Pros:

  • Easily handled and controlled
  • Battery works with other DeWalt products
  • Electronic brakes for optimal safety

Cons:

  • Can heat up during use
  • May power through charged batteries easily

SKILSAW SPT77WML- Circular Saw

One of the highest performers in the list, it is ideal for the professional as well as the avid DIY enthusiast. With this cord-powered saw and 15 amps of power (and a dual-field motor), it can rip through even the most challenging materials. The worm drive design is meant to keep weight down, too, reducing fatigue. However, it still weighs more than 11 pounds.

Getting the cuts required, with precision, is easier than ever thanks to the range of 0 to 45-degree stops. It also features the Cut Ready depth system along with magnesium components to make cutting easy and consistent. The anti-snag guard also ensures smoother cuts.

A cutting capacity of 2-3/8 inch at 90° means that even challenging cuts and angles can be easily tackled with the 7 ¼” blade. The ergonomic, soft-grip handles also add to the comfort of this circular saw.

Pros:

  • Magnesium components
  • Dual-Field motor runs much cooler
  • Easy to adjust and wide-ranging angles for almost any use

Cons:

  • Even with excellent design, it is a heavy 11.6 pounds

Skil 5280-01 Circular Saw

If you are a hobbyist, this is the lightweight saw you’ve been seeking. As the go to circular saw for smaller, household jobs, it is a lightweight option (less than seven pounds) with lots of excellent features. With a laser guide that ensures razor-straight cuts, it is the perfect starter saw for the first-time buyer.

With a lower than average price, it features some premium options such as the sawdust removal system that ensures the cutting surface is clear. It has a 14 amp motor with 5300 rpm, which means it does make fast cuts.

The 7 ¼” carbide tipped blade has a spindle lock feature for quick changes, and a variety of cuts are possible with the 51-degree bevel. The ergonomic handle ensures control and less fatigue, too.

Pros:

  • Laser guide for accuracy
  • Large foot brings stability
  • Spindle lock for fast changes
  • Lower price than most on this list

Cons:

  • No electric brake
  • Six-foot power cord really limits mobility
  • Not strong enough for professional work

DEWALT DWE575SB Circular Saw

Among the lighter weight circular saws, at just under nine pounds, it is a remarkably high-quality tool. Very compact and portable with a 10’ cord, it is able to rip even challenging materials. A 15 amp, Dual-Field motor promises 5,300 RPM yet remains cool.

A right-sided sidewinder with a 7 ¼” blade, it is the perfect for optimal visibility along with comfortable gripping and balance. Most users approve of its design because they will not have to take a leaning stance to see over the blade. And fitted with a dust blower, this circular saw eliminates the common issue of sawdust accumulation and blocked lines of sight. The 56-degree bevel with stops at 0 degrees and 45 degrees give optimal flexibility.

Pros:

  • True Grip handles give control and safety
  • Dust blower increases accuracy

Cons:

  • Depth adjustment lever’s flat design has earned it a few complaints

Makita 5477NB Circular Saw

An investment item, this well-designed, hypoid model circular saw is meant to last for years to come. It is the perfect for both the expert and the novice as it delivers great cutting capability along with reliable and stable performance.

The 7 ¼” blade is easily adjustable thanks to the large side levers that set depth and angle. The hypoid design also means more surface contact, further supporting cut control. Plus, the overall design (including a sealed gearbox) means lower demands for upkeep and maintenance.

A 15 amp motor that delivers up to 4500 rpm, it can bevel from 0 up to 51.5 degrees and offers positive stops at 45 degrees. And blade changes are remarkably simple due to the push button spindle lock.

Pros:

  • High-performance machine thanks to the hypoid gearing system
  • Great handle design for optimal control
  • Blade changes are fast and easy

Cons:

  • At 14 pounds, it is a far heavier saw than any other on the list
  • Powerful enough to give a kick with smaller jobs, so not for everyone

Makita 5007F Circular Saw

A smaller circular saw, it is nonetheless powerful. Able to bite through wood, tile, metal and pipes, it would be the go to circular saw for a professional or busy home improvement enthusiast.

It is a lightweight, even though it offers a powerful 15 amp motor with a surprising 5800 rpm. A centrifugal fan and baffle system adds a touch of innovation and ensures the motor remains cool under even the greatest challenges. You can even switch from AC to DC when alternative power is available.

It also delivers a surprisingly variable cutting capacity with up to 2 3/8” at 90 degrees and up to 1 ¾” at 45 degrees on the 7 ¼” blade. A low guard helps with narrower and beveled cut accuracy, but it also features LED lights that highlight the line of cut. Unlike many in the list, this model features a dust blower to help you nail your line of cut without repeatedly stopping to remove sawdust and buildup.

Pros:

  • Ball bearing construction ensures longer life
  • Flat motor housing adds stability
  • Easy blade replacement

Cons:

  • Without speed control or electric braking, it is not as safe as other models

TACKLIFE TCS115A Circular Saw

If you have room in your budget and toolbox for two circular saws, this unique and flexible saw from TACKLIFE should be one of them. With a design that allows single hand use, it still delivers reliable and strong cuts. Adjust or even disassemble with a single move of the handle!

A laser guide promises lots of support with even difficult cuts, and the 5.8 amp motor delivers up to 3500 rpm to make it easier than ever to get through plastic, wood, tile, pipe and more. The six different blades (ranging from 4-3/4″ & 4-1/2”) include one for wood, another for soft metal, one for tile, and more. With the different blades, you also get easy to set bevels and depts that offer 1 11/16” at 90 degrees and 1 3/8” at 45 degrees.

With safe switches and ergonomic design and lighter weight (around eight pounds), it is a compact or “mini” style with an integrated safety button required to cue the motor.

Pros:

  • Durable metal components
  • Multiple blades and cutting capabilities
  • Low fatigue design

Cons:

  • Small size not suited to all purposes

Makita HS0600 Circular Saw

This sidewinder brings the Makita reputation along with it but bumps things up a notch by offering a larger 10 ¼” blade that grinds through four times the lumber of a regular blade. A 15 amp motor comes with 4300 rpm and ensures your saw can get through even engineered lumber. This means it is a good choice for the professional as well as the experienced DIY expert.

Weighing in at over 15 pounds, though, it runs the risk of boosting fatigue, but the ergonomic design brings a huge amount of balance, and the front and top handles have been engineered for maximum control and comfort. With dual front and rear bevel supports, accuracy is assured, but the flat motor housing is also another element of the saw’s stability.

Of course, the cutting capabilities with of 3 3/16” at 90 degrees and 2 11/16” at 45 degrees deliver a tremendous amount of flexibility, too. They adjust on the fly with large, rubberized levers that make bevel and depth adjustments a breeze.

Pros:

  • Bevel cut up to 50 degrees
  • Precision gearing
  • Adjusts on the fly

Cons:

  • On the heavy side

PORTER-CABLE PCE310 Circular Saw

This is one of the heaviest duty circular saws in the list and is ideal for the avid amateur and the skilled professional. With a 15 amp motor that delivers 5500 RPM, it slices through even the most difficult materials with easy. Yet, it weighs only nine pounds, making it far lighter than other, comparable models.

It can deliver 2.5” cuts at a 90 degree and up to 1 7/8” at 45 degrees. With its carbide tipped blade at a generous 7 ¼” you get clean work whether using the 55-degree max bevel, the presets (22.5 and 45 degrees), or any other settings.

Meant to work, it has a spindle lock and depth adjustments that can be adjusted immediately. Corded rather than battery operated, it includes an auxiliary handle to guarantee a good line of sight and metal upper and lower guards to deliver true durability.

Pros:

  • Adjusts on the fly
  • Lightweight and yet also powerful
  • Multiple blade depths for a wide array of uses

Cons:

  • Has no rip guide
  • Some complaints about blade guards loosening

SKILSAW SOUTHPAW SPT67M8-01 Circular Saw

As its name implies, this circular saw is a left bladed sidewinder that helps to ensure optimal visibility and more accurate cuts. It is an all magnesium unit that promises a longer life span, and with the dual field motor, it remains cool and also comes with longer engine life, too.

With “best in class” torque it is a fast cutter using 15 amps and delivering 5300 rpm. It delivers 2 7/16” at 90 degrees and 1 7/8” at 45 degrees, with an extended 56-degree bevel for the widest range of cut options with its 7-1/4″ blade.

An ergonomically designed circular saw, it is a delight for a left-handed user but is also designed to optimize the experience for a right-handed owner. The saw weighs in at less than nine pounds and relies on its unique guards to direct dust away from the user (much like a work drive model).

Pros:

  • Lightweight but with a great cutting depth
  • Premium quality materials and design
  • High torque than many other models

Cons:

  • No electronic braking on the blade, which reduces user safety

BLACK+DECKER BDCCS20B Circular Saw

A unique little standout from the rest of the list, this smaller cordless saw is a high performer and wins praise from all who use it. It is often compared to the DeWalt brand for its capabilities. It adapts to the same battery pack used in many other home-sized Black+Decker devices.

The high torque motor is not up to heavy duty (i.e., professional work) but is more than satisfactory with almost any wooden materials. It is an ideal all-purpose trimming machine. Battery operated it is lighter in weight (six pounds) and uses a 5.5-inch blade that makes the saw easier to maneuver and handle with accuracy.

This is a left-sided sidewinder that has been designed for enhanced line of sight, and as a remarkable boon to the left-handed DIY enthusiast. Bevel capacity is from 45 to 90 degrees, making it a flexible tool for most users as well as one of the top circular saws for the year.

Pros:

  • Highly portable and uses standard Black + Decker battery pack
  • Lightweight at only six pounds
  • Thin and small blade offers consistent cutting

Cons:

  • Battery power limits the engine power
  • Plastic components

Now that you have a basic idea of the features of the top-rated circular saws for 2019, it is time to learn how to go about selecting a circular saw that meets your needs.

Choosing the Perfect Circular Saw

Step one in choosing the circular saw for your needs, apart from reading these circular saw reviews, is first to be honest with yourself about the way you intend to use the circular or electric saw. Additionally, you need to be realistic about your experience and skills with such a tool.

If you are a novice, then it is best to choose one of the sidewinders we’ve identified above, and even work with one that uses laser guides to help with accurate cuts. Those that control dust and sawdust are also great for the beginner.

If you are already well versed at the use of an electric saw and other power tools, then you can just narrow down the options based on things like style, power, and so on.

Of course, even the most experienced folks may not know about the different types of saws and how they may have specific advantages over other styles. So, that’s where we will begin in our brief tutorial about identifying the circular saw for your needs.

Know the Types of Circular Saws

As we mentioned briefly in the introduction, there are several major types or styles of circular saws:

  • Sidewinder or Inline – They can have their blades on the right or left side, and the rest of the saw’s weight is always set opposite the blade. So, a left-sided circular saw would have weight on the right side, and vice versa. Typically, this means that the weight of the saw sits on the side of the board that is NOT hanging into open space, i.e., behind the cut.

Unfortunately, this can make it difficult to see where you are making the cut, which is why so many use an array of guides, including laser guides.

The upside of the sidewinder is that your hands are far from the blade, and the sidewinders are usually thought to be safer, lighter and quite versatile.

  • Worm Drive – This design always features the blade on the left side of the motor, meaning that the weight of a worm drive circular saw is on the right. This means that the way that the blade is installed leaves a clear line of sight to the cutting area, and you will always be able to see the entire cut as you are making it.

A downside to the worm drive is that most circular saw owners are introduced to the equipment on a sidewinder design, and it does take a lot of adjustment to use the worm drive option safely. Yet, when you do get used to it, the style allows you to cut more wood, faster as they are usually more powerful than other styles in addition to being accurate.

The downside is that they do not handle small cuts with any sort of ease or effectiveness.

NOTE: Both the worm drive and hypoid are geared down, meaning slower blade speeds or RPM, but in exchange, the user gets more torque.

  • Hypoid – These vary most widely in their gearing. The design of the gears are like cones and this allows the motor to be parallel with the blade. The advantage is that all of the power from the motor goes to the blade, translating to lower RPM, higher torque and greater strength.

The blades are on the left side, and in many ways, they are similar to a worm drive. However, they are longer and heavier, as well as a bit louder. They are some of the top circular saws for professionals. They also demand almost no maintenance since they typically rely on sealed motor systems.

  • Other – Mini saws are the most commonly seen “other” type, and they are not the ideal circular saws for heavier duty jobs but can be remarkably handy in a lot of different settings.

Once you have determined what you’ll be doing with your circular saw, you will find it easier to choose the type. Typically, heavier duty users choose the hypoid, while it is a real toss up between worm and sidewinders for average users. If you want a lot of added features, you’ll want to avoid sidewinders, though, and consider a worm drive option.

man woodworking with circular saws

Know Your Power Sources

Cord or battery? This is not a minor issue. Though a cordless saw may deliver similar amounts of power as a corded model, that performance is not always assured. Of course, a cord that is shorter than ten feet can be a real impediment, even if power is assured.

  • Cordless saws are great circular saws for those who work where power supplies are not always available or safe – even with a heavy duty extension cord. Additionally, cordless or battery powered saws may be the perfect circular saws for cutting wood and little else. There are some that can cope with more challenging cuts, but generally speaking, they don’t often have enough power for anything beyond wood or lumber.

Additionally, the life of the battery is not always assured, and so the use of a cordless may mean having a backup on hand for bigger projects.

  • Corded saws are the great circular saws for all other materials in addition to wood and engineered lumber. They can usually work as a skill saw and get through metal, brick, tile and wood. They can work continuously without any concerns of diminished power or capability. The downside is that you may find yourself lugging long, heavy-duty extension cords around and always keeping a sharp eye that you don’t trip, cut or otherwise harm the cord.

Now, this is power source, but not the kind of power output from the electric saw. For that, we have to turn attention to motors and their output.

Understanding Motors and Power

For the most part, the very top circular saws will put have 10 to 15 amp motors, and basic wood cutting usually doesn’t demand much more than that. Professional work, of course, will need more and if you are investing in a circular saw for a construction or other similar field, a 15 amp motor should be the bare minimum.

The important thing here is that torque decline occurs only with battery powered circular saws. The risk of decreasing power is one of the trade-offs for the lighter weight and portability of the battery powered. So, start by looking at the amps, and use that against your intended usage of the saw (professional vs. DIY) to select your model.

Essentially, you will see an average of 10 to 15 in the circular saw reviews above, making any of them suited to a DIY enthusiast or a professional.

However, when the expected RPM measures were available, we listed them in the different circular saw reviews. Typically, you want more RPM as that means you get more power out of the saw and better cuts. Keep in mind, though, that some RPM listings were with the saw cutting an average material. If you cut dense and hard materials, you may not get that power.

The Shoe

Another factor you need to consider is the material used to make the circular saw, especially the shoe or footplate. This is base of your circular saw, where it rests atop the material you cut. It is what you use to adjust the depth and bevel angle, and it is often noted as the part of the saw that will give out first (if the saw is poorly made).

Sadly, it is also the area most likely to absorb the shock if you drop the circular saw. Even the great circular saws will sustain damage if dropped just once, and so you want the shoe to be made from a durable material.

There are three materials you’ll see the shoes or base plates made from, and they are listed in order of the most durable to least durable:

  • Magnesium – This will add to the overall price of the circular saw, but it is the strongest option for your base plate. An all magnesium saw is likely to be the most expensive, but also the strongest and lightest.
  • Aluminum – This is a thicker and more durable option than steel, but it is not as rugged as magnesium. It is cast in the identical way of steel but tends to be a better choice.
  • Steel – A cast metal, it is going to bend surprisingly easy, particularly if you drop the saw. While damages may be reparable, it is not always the case. It is best to avoid saws with steel shoes or base plates.

You may also see some baseplates made of fiber-reinforced plastics, and these are actually almost as durable as magnesium and often deemed better than aluminum or steel!

Generally speaking, the material and quality of the base plate is usually an indicator of the overall quality of the saw. When a manufacturer uses shoddy or less durable materials on the base plate or shoe, it is usually a good sign that the entire saw received the same treatment.

The Issue of Blades

A circular saw, or any sort of electric saw, is meant to cut. That means blades have to be taken into consideration. With circular saws, you’ll have to consider:

  • The size of the blade
  • The adjustability of the blade
  • The material that blades are made from

You can see from our handy reference table that the average or most common size is going to be 7 ¼”. However, there were also odd sizes like the mini saw’s 4 ¾” blade option, a circular saw sporting a 10 ¼” blade and even one with a 6 1/2” blade.

Which should you choose? As odd as it might seem, you can only expect a lot from a blade if it is paired with the right motor. For example, you might be doing a lot of cutting on materials of similar thicknesses, and think that a 10 ¼” blade is a good choice. It is, but only if that blade is partnered with a motor offering adequate horsepower to get through the thicker or harder materials.

So, simply be aware of your intended use of the circular saw, and choose a blade and motor combo that will make it work.

The adjustability of a blade simply means your option for changing the depth of the cut as well as the angle or “bevel”. Circular saws are going to offer a standard 2 ½” cut (as do all of the circular saws reviews above indicate). However, they can go as deep as 2 ¾”.

The circular saw reviews also indicated when a saw could adjust from the stock 90 degrees to a bevel as low as 20 degrees or 45 degrees.

These factors are crucial and you always want saws that can have a 0-degree maximum cutting depth and at least 45 degrees of a bevel. This ensures you cut precise bangles or miters. Don’t turn down one of the circular saw because it is not capable of fine-tuned miters. Instead, purchase an actual miter saw that is designed for the full range and oddest combinations.

Keep in mind, though, that the size and adjustability of any blade can be ruined or impaired by the wrong kind of blade, or a lower quality blade.

The type of blade varies based on what a manufacturer supplies as the stock blade. You saw in the circular saw reviews that many of the saws came with a carbide tipped blade. These are “high-speed steel” blades that are enhanced with teeth that are strengthened with titanium carbide or tungsten. This makes them capable of getting through hard or engineered wood with greater ease. We also did some circular saw reviews of options with high-speed steel and even a variety of blades.

Keep in mind that a saw that arrives with a masonry blade or a tile cutting blade needs the power to affect the best cuts. Most manufacturers supply high speed or carbide tipped options.

Weighty Matters

Many readers may wonder why we included the weights of the circular saw in our reviews comparison. To put it plainly – the heavier the saw, the less amount of force the user must apply. We did explain that motor power and blade type has a lot to do with it, but so too does the weight of the saw.

While a heavier saw makes lighter work of difficult materials, lifting a 14 pound saw for hours on end can become a very difficult task. If you are not already in the right physical condition to hoist a heavy saw into place repeatedly, you will want to consider a powerful, but lighter weight option, like one of the seven or eight-pound circular saws.

Safety Features

As we noted in some of the circular saw reviews, not all of the saws came with electric braking. This is something that halts blade rotation in as little as two seconds. It is not an essential, but we strongly urge you to make it a serious consideration whether you are an expert with circular saws or a first-time owner.

Additionally, it is often deemed both easier and safer to have a saw with a laser guide. This projects on to the material and helps you with accurate cuts, but it is also a feature that can keep you a bit safer by making the cutting path clearer and more obvious.

In Conclusion

Choosing the right or circular saw for your needs begins with that one simple consideration: What will I be doing with this saw?

Once you are clear about the kind of materials, the number of materials, and the level of experience you have with circular saws, it makes it easier to use what you have learned here to select the right option. Keep in mind, there is nothing wrong with purchasing a lightweight “introductory” model or even doubling up, such as having that unique hand-held circular saw along with a more traditional model.

The goal of owning any circular saw is to make your life easier and get good results. With all that you have learned here, you should be able to choose the best models for projects of any kind or any level of experience.